configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / sama5d2_ptc.h

diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index c1c01bd..ce8904e 100644 (file)
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -10,9 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 /* serial console */
@@ -48,8 +45,6 @@
 #endif
 
 /* NAND flash */
-#define CONFIG_CMD_NAND
-
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -62,18 +57,11 @@
 /* PMECC & PMERRLOC */
 #define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_CMD_NAND_TRIMFFS
 #endif
 
 /* USB */
 #define CONFIG_CMD_USB
 
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#endif
-
 /* USB device */
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
@@ -82,11 +70,6 @@
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2_PTC"
 
-#if defined(CONFIG_CMD_USB)
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -98,7 +81,6 @@
 #undef CONFIG_ENV_OFFSET_REDUND
 #undef CONFIG_BOOTCOMMAND
 /* u-boot env in nand flash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x200000
 #define CONFIG_ENV_OFFSET_REDUND       0x400000
 #define CONFIG_BOOTCOMMAND             "nand read 0x21000000 0xb80000 0x80000;"        \
@@ -121,22 +103,13 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
 #ifdef CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP               8