Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / sama5d27_som1_ek.h

diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h
index 24fa027..8a39069 100644 (file)
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration file for the SAMA5D27 SOM1 EK Board.
  *
  * Copyright (C) 2017 Microchip Corporation
  *                   Wenyou Yang <wenyou.yang@microchip.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,75 +14,10 @@
 #undef CONFIG_SYS_AT91_MAIN_CLOCK
 #define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */
 
-#define CONFIG_MISC_INIT_R
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE          0x20000000
-#define CONFIG_SYS_SDRAM_SIZE          0x8000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x218000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR           0x22000000 /* load address */
-
-/* NAND flash */
-#undef CONFIG_CMD_NAND
-
-/* SPI flash */
-#define CONFIG_SF_DEFAULT_SPEED                66000000
-
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_SD_BOOT
-/* u-boot env in sd/mmc card */
-#define FAT_ENV_INTERFACE      "mmc"
-#define FAT_ENV_DEVICE_AND_PART        "0"
-#define FAT_ENV_FILE           "uboot.env"
-#define CONFIG_ENV_SIZE                0x4000
-/* bootstrap + u-boot + env in sd card */
-#define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x21000000 at91-sama5d27_som1_ek.dtb; " \
-                               "fatload mmc 0:1 0x22000000 zImage; " \
-                               "bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-       "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-#endif
-
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_ENV_OFFSET              0xb0000
-#define CONFIG_ENV_SIZE                        0x10000
-#define CONFIG_ENV_SECT_SIZE           0x10000
-#define CONFIG_BOOTCOMMAND             "sf probe 0; "                          \
-                                       "sf read 0x21000000 0xc0000 0x20000; "  \
-                                       "sf read 0x22000000 0xe0000 0x400000; " \
-                                       "bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-       "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-#endif
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE           0x200000
-#define CONFIG_SPL_MAX_SIZE            0x10000
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#endif
-
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
-#endif
-
 #endif