Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / sam9x60ek.h

diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h
index 5f89ae4..772805d 100644 (file)
--- a/include/configs/sam9x60ek.h
+++ b/include/configs/sam9x60ek.h
@@ -14,22 +14,9 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK     24000000        /* 24 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #define CONFIG_USART_BASE   ATMEL_BASE_DBGU
 #define CONFIG_USART_ID     0 /* ignored in arm */
 
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
@@ -40,56 +27,27 @@
 #define CONFIG_SYS_SDRAM_SIZE          0x10000000      /* 256 megs */
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
+        GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_MASK_ALE       BIT(21)
 #define CONFIG_SYS_NAND_MASK_CLE       BIT(22)
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PD4
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PD5
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_MTD_DEVICE
 #endif
 
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_PMECC_CAP               8
-#define CONFIG_PMECC_SECTOR_SIZE       512
-
-#define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
-
 #ifdef CONFIG_SD_BOOT
 /* bootstrap + u-boot + env + linux in sd card */
-#define CONFIG_BOOTCOMMAND  \
-                       "fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \
-                       "fatload mmc 0:1 0x22000000 zImage;" \
-                       "bootz 0x22000000 - 0x21000000"
 
 #elif defined(CONFIG_NAND_BOOT)
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_BOOTCOMMAND     "nand read " \
-                               "0x22000000 0x200000 0x600000; " \
-                               "nand read 0x21000000 0x180000 0x20000; " \
-                               "bootz 0x22000000 - 0x21000000"
 
 #elif defined(CONFIG_QSPI_BOOT)
 /* bootstrap + u-boot + env + linux in SPI NOR flash */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; "                                  \
-                               "sf read 0x21000000 0x180000 0x80000; "         \
-                               "sf read 0x22000000 0x200000 0x600000; "        \
-                               "bootz 0x22000000 - 0x21000000"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (512 * 1024 + 0x1000)
-
 #endif