+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
*
* Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_UNIVERSAL_H
+#define __CONFIG_UNIVERSAL_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
-#define CONFIG_S5P 1 /* which is in a S5P Family */
-#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */
-#define CONFIG_UNIVERSAL 1 /* working with Universal */
-#define CONFIG_TIZEN 1 /* TIZEN lib */
+#include <configs/exynos4-common.h>
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_TIZEN /* TIZEN lib */
/* Keep L2 Cache Disabled */
#define CONFIG_SYS_L2CACHE_OFF 1
+/* Universal has 2 banks of DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_TEXT_BASE 0x44800000
-
-/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */
-#define CONFIG_SYS_CLK_FREQ_C210 24000000
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_CLK_FREQ_C210
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-
-/* select serial console configuration */
-#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
-#define CONFIG_BAUDRATE 115200
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
+#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* PWM */
-#define CONFIG_PWM 1
+#define CONFIG_BOOTCOMMAND "run mmcboot"
-/* It should define before config_cmd_default.h */
-#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
+ - GENERATED_GBL_DATA_SIZE)
-/* Command definition */
-#include <config_cmd_default.h>
+#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_ONENAND
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
-#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
-#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
- "128k(s-boot)"\
- ",896k(bootloader)"\
- ",256k(params)"\
- ",2816k(config)"\
- ",8m(csa)"\
- ",7m(kernel)"\
- ",1m(log)"\
- ",12m(modem)"\
- ",60m(qboot)"\
- ",-(UBI)\0"
-
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
#define MBRPARTS_DEFAULT "20M(permanent)"\
",20M(boot)"\
",100M(swap)"\
",-(UMS)\0"
-#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-
-#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
-#define CONFIG_BOOTBLOCK "10"
-#define CONFIG_UBIBLOCK "9"
-
-#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
-#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
- "${mtdparts}"
-
-#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
"onenand write 0x41008000 0xc00000 0x500000\0" \
"bootk=" \
"run loaduimage; bootm 0x40007FC0\0" \
- "updatemmc=" \
- "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
"updatebackup=" \
- "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
+ "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
+ "mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
- CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
- CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+ "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
+ "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
+ "${lcdinfo} ${console} ${meminfo}; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
- CONFIG_ENV_COMMON_BOOT \
+ "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
+ "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
+ "${lcdinfo} ${console} ${meminfo}" \
"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
"nfsboot=" \
"set bootargs root=/dev/nfs rw " \
"nfsroot=${nfsroot},nolock,tcp " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+ "${netmask}:generic:usb0:off ${console} ${meminfo}" \
"; run bootk\0" \
"ramfsboot=" \
"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
- "mtdparts=" MTDPARTS_DEFAULT \
+ "console=console=ttySAC1,115200n8\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"mbrparts=" MBRPARTS_DEFAULT \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
- "bootblock=" CONFIG_BOOTBLOCK "\0" \
- "ubiblock=" CONFIG_UBIBLOCK" \0" \
+ "bootblock=10\0" \
+ "ubiblock=9\0" \
"ubi=enabled\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"mmcdev=0\0" \
"mmcrootpart=3\0" \
"opts=always_resume=1"
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "Universal # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
-/* Universal has 2 banks of DRAM */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */
-#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
-#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
-#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
-
-#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND
#define CONFIG_SYS_ONENAND_BASE 0x0C000000
-#define CONFIG_ENV_IS_IN_MMC 1
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */
-
-#define CONFIG_DOS_PARTITION 1
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG_PHY
/*
* SPI Settings
*/
#define CONFIG_SOFT_SPI
-#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
-#define SPI_DELAY udelay(1)
-#undef SPI_INIT
-#define SPI_SCL(bit) universal_spi_scl(bit)
-#define SPI_SDA(bit) universal_spi_sda(bit)
-#define SPI_READ universal_spi_read()
#ifndef __ASSEMBLY__
void universal_spi_scl(int bit);
void universal_spi_sda(int bit);
/* Common misc for Samsung */
#define CONFIG_MISC_COMMON
-#define CONFIG_MISC_INIT_R
-
/* Download menu - Samsung common */
#define CONFIG_LCD_MENU
-#define CONFIG_LCD_MENU_BOARD
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
-#include <power/max8998_pmic.h>
#define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
#define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
#define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
#define KEY_PWR_INTERRUPT_MASK (1 << 7)
-#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
/* LCD console */
#define LCD_BPP LCD_COLOR16
-#define CONFIG_SYS_WHITE_ON_BLACK
/*
* LCD Settings
*/
-#define CONFIG_EXYNOS_FB
-#define CONFIG_LCD
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_16BPP
#define CONFIG_LD9040
-#define CONFIG_EXYNOS_MIPI_DSIM
-#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
#endif /* __CONFIG_H */