#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
/* input clock of PLL: has 24MHz input clock at S5PC110 */
#define CONFIG_SYS_CLK_FREQ_C110 24000000
* 1MB = 0x100000, 0x100000 = 1024 * 1024
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */
- /* initial data */
/*
* select serial console configuration
*/
#define CONFIG_SERIAL2 1 /* use SERIAL2 */
-#define CONFIG_SERIAL_MULTI 1
#define CONFIG_BAUDRATE 115200
/* MMC */
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_MMC 1
-#define CONFIG_S5P_MMC 1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+
+/* PWM */
+#define CONFIG_PWM 1
/* It should define before config_cmd_default.h */
#define CONFIG_SYS_NO_FLASH 1
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "Goni # "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
#define CONFIG_SYS_HZ 1000
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
-
/* Goni has 3 banks of DRAM, but swap the bank */
#define CONFIG_NR_DRAM_BANKS 3
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
+#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
+
+#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
#endif /* __CONFIG_H */