configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / s32v234evb.h

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 9f85fdc..c887771 100644 (file)
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -61,7 +61,6 @@
 #else
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_DM_SERIAL
 #define CONFIG_FSL_LINFLEXUART
@@ -73,22 +72,16 @@
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_UART_PORT           (1)
-#define CONFIG_BAUDRATE                                115200
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
 #define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 /* #define CONFIG_CMD_EXT2 EXT2 Support */
-#define CONFIG_DOS_PARTITION
 
 #if 0
 
@@ -104,23 +97,12 @@
 #define CONFIG_PHY_MICREL
 #endif
 
-#if 0                          /* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE            I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED           100000
-#endif
-
 #if 0                          /* Disable until the FLASH will be implemented */
 #define CONFIG_SYS_USE_NAND
 #endif
 
 #ifdef CONFIG_SYS_USE_NAND
 /* Nand Flash Configs */
-#define        CONFIG_CMD_NAND
 #define CONFIG_JFFS2_NAND
 #define MTD_NAND_FSL_NFC_SWECC 1
 #define CONFIG_NAND_FSL_NFC
@@ -134,7 +116,6 @@
 #define CONFIG_LOADADDR                        0xC307FFC0
 #define CONFIG_BOOTARGS                        "console=ttyLF0 root=/dev/ram rw"
 
-#define CONFIG_CMD_ENV
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "boot_scripts=boot.scr.uimg boot.scr\0" \
        "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
@@ -206,12 +187,6 @@
 #define CONFIG_SYS_MALLOC_BASE         (DDR_BASE_ADDR)
 #endif
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128 * 1024)    /* regular stack */
-
 #if 0
 /* Configure PXE */
 #define CONFIG_BOOTP_PXE
@@ -233,11 +208,8 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET              (12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0