#include <asm/arch/hardware.h>
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_SYS_NO_FLASH
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_OF_LIBFDT
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
-#define CONFIG_SYS_TIMER_COUNTER (TIMER7_BASE + 8)
+#define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
+#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SPL_BOARD_INIT
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+/* Bootrom will load u-boot binary to 0x0 once return from SPL */
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#else
#define CONFIG_SYS_TEXT_BASE 0x00100000
+#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#define CONFIG_SPL_TEXT_BASE 0xff704004
+#define CONFIG_SILENT_CONSOLE
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_CONSOLE_MUX
+#endif
+
/* MMC/SD IP block */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SDHCI
#define CONFIG_DWMMC
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SPL_PINCTRL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_RAM_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_TIME
-
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SF_DEFAULT_SPEED 20000000
-#define CONFIG_CMD_I2C
-
#ifndef CONFIG_SPL_BUILD
+/* usb otg */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_ROCKCHIP_USB2_PHY
+#define CONFIG_USB_GADGET_VBUS_DRAW 0
+
+/* fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */
+#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
+
+/* usb mass storage */
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER "Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM 0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM 0x320a
+
+/* Enable gpt partition table */
+#define CONFIG_CMD_GPT
+
#include <config_distro_defaults.h>
#define ENV_MEM_LAYOUT_SETTINGS \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
+#define CONFIG_RANDOM_UUID
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,start=8M,size=64M,bootable,uuid=${uuid_gpt_boot};" \
+ "name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
+
/* First try to boot from SD (index 0), then eMMC (index 1 */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
* limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x1fffffff\0" \
+ "initrd_high=0x1fffffff\0" \
+ "partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
+ ROCKCHIP_DEVICE_SETTINGS \
BOOTENV
#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
#endif