+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3188_COMMON_H
#include "rockchip-common.h"
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
-#define CONFIG_SYS_TIMER_BASE 0x2000e000 /* TIMER3 */
-#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-
#define CONFIG_SYS_NS16550_MEM32
#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x60000000 once return from SPL */
-#define CONFIG_SYS_TEXT_BASE 0x60000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x60100000
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK31"
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_TEXT_BASE 0x10080804
-/* tpl size 1kb - 4byte RK31 header */
-#define CONFIG_SPL_MAX_SIZE (0x400 - 0x4)
-#elif defined(CONFIG_SPL_BUILD)
-/* spl size 32kb sram - 2kb bootrom - 1kb spl */
-#define CONFIG_SPL_MAX_SIZE (0x8000 - 0xC00)
-#define CONFIG_SPL_TEXT_BASE 0x10080C00
-#define CONFIG_SPL_FRAMEWORK 1
-#define CONFIG_SPL_CLK 1
-#define CONFIG_SPL_PINCTRL 1
-#define CONFIG_SPL_REGMAP 1
-#define CONFIG_SPL_SYSCON 1
-#define CONFIG_SPL_RAM 1
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT 1
+#define CONFIG_SPL_TEXT_BASE 0x10080800
+/* spl size 32kb sram - 2kb bootrom */
+#define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_SERIAL 1
-#endif
#define CONFIG_SPL_STACK 0x10087fff
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_SYS_SDRAM_BASE 0x60000000
-#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
#define SDRAM_MAX_SIZE 0x80000000
#define CONFIG_SPI_FLASH
-#define CONFIG_SPI
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
-#define CONFIG_ROCKCHIP_USB2_PHY
/* usb host support */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
-#endif
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x60000000\0" \
"pxefile_addr_r=0x60100000\0" \
/* Linux fails to load the fdt if it's loaded above 256M on a Rock board,
* so limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_high=0x6fffffff\0" \
"initrd_high=0x6fffffff\0" \
"partitions=" PARTS_DEFAULT \