imx: wandboard: convert FEC support to DM_ETH

[platform/kernel/u-boot.git] / include / configs / r2dplus.h

diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 41a2a15..0b16fb0 100644 (file)
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -1,126 +1,69 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef DEBUG
-
-#define CONFIG_SH              1
-#define CONFIG_SH4             1
 #define CONFIG_CPU_SH7751      1
-#define CONFIG_CPU_SH_TYPE_R   1
-#define CONFIG_R2DPLUS         1
 #define __LITTLE_ENDIAN__      1
 
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DFL
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_EXT2
-#define CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_BOARDINFO
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE    1
-#define CONFIG_BAUDRATE                115200
 #define CONFIG_CONS_SCIF1      1
-#define BOARD_LATE_INIT                1
 
-#define CONFIG_BOOTDELAY       -1
-#define CONFIG_BOOTARGS                "console=ttySC0,115200"
 #define CONFIG_ENV_OVERWRITE   1
 
 /* SDRAM */
-#define CFG_SDRAM_BASE         (0x8C000000)
-#define CFG_SDRAM_SIZE         (0x04000000)
+#define CONFIG_SYS_SDRAM_BASE          0x8C000000
+#define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
-#define CFG_LONGHELP
-#define CFG_PROMPT             "=> "
-#define CFG_CBSIZE             256
-#define CFG_PBSIZE             256
-#define CFG_MAXARGS            16
-#define CFG_BARGSIZE           512
-/* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE     { 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_PBSIZE              256
 
-#define CFG_MEMTEST_START      (CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END                (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
 
-#define CFG_LOAD_ADDR          (CFG_SDRAM_BASE + 32 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CFG_MONITOR_BASE       (CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN                (256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN         (1024 * 1024)
-/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE      (256)
-#define CFG_BOOTMAPSZ          (8 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
 
 /*
  * NOR Flash ( Spantion S29GL256P )
  */
-#define CFG_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_BASE         (0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1)
-#define CFG_MAX_FLASH_SECT  256
-#define CFG_FLASH_BANKS_LIST   { CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BASE          (0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  256
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE   0x40000
 #define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR        (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ    60000000
-#define TMU_CLK_DIVIDER                4
-#define CFG_HZ                 (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
-#define        CFG_PLL_SETTLING_TIME   100/* in us */
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define        CONFIG_SYS_PLL_SETTLING_TIME    100/* in us */
 
 /*
  * IDE support
  */
 #define CONFIG_IDE_RESET       1
-#define CFG_PIO_MODE           1
-#define CFG_IDE_MAXBUS         1 /* IDE bus */
-#define CFG_IDE_MAXDEVICE      1
-#define CFG_ATA_BASE_ADDR      0xb4000000
-#define CFG_ATA_STRIDE         2 /* 1bit shift */
-#define CFG_ATA_DATA_OFFSET    0x1000  /* data reg offset */
-#define CFG_ATA_REG_OFFSET     0x1000  /* reg offset */
-#define CFG_ATA_ALT_OFFSET     0x800   /* alternate register offset */
+#define CONFIG_SYS_PIO_MODE            1
+#define CONFIG_SYS_IDE_MAXBUS          1 /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE       1
+#define CONFIG_SYS_ATA_BASE_ADDR       0xb4000000
+#define CONFIG_SYS_ATA_STRIDE          2 /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET     0x1000  /* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET      0x1000  /* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x800   /* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 
 /*
  * SuperH PCI Bridge Configration
  */
-#define CONFIG_PCI
-#define CONFIG_SH4_PCI
 #define CONFIG_SH7751_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW   1
-#define __io
-#define __mem_pci
-
-#define CONFIG_PCI_MEM_BUS     0xFD000000      /* Memory space base addr */
-#define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE    0x01000000      /* Size of Memory window */
-#define CONFIG_PCI_IO_BUS      0xFE240000      /* IO space base address */
-#define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE     0x00040000      /* Size of IO window */
-
-/*
- * Network device (RTL8139) support
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_RTL8139
-#define _IO_BASE               0x00000000
-#define KSEG1ADDR(x)           (x)
 
 #endif /* __CONFIG_H */