Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / quad100hd.h

diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 403837e..f847f9c 100644 (file)
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -34,6 +34,8 @@
 #define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_405EP           1               /* Specifc 405EP support*/
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+
 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f */
@@ -105,6 +107,11 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK                     /* external serial clock */
 #define CONFIG_SYS_BASE_BAUD           691200
 #define CONFIG_BAUDRATE                115200
@@ -170,7 +177,7 @@
 #define CONFIG_SYS_FLASH_BASE          0xFFC00000
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Monitor   */
 #define CONFIG_SYS_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_MONITOR_BASE        (TEXT_BASE)
+#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_TEXT_BASE)
 
 /*
  * For booting Linux, the board info and command line data
@@ -202,7 +209,7 @@
 #ifdef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE   0x10000 /* size of one complete sector  */
 /* the environment is located before u-boot */
-#define CONFIG_ENV_ADDR                (TEXT_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE)
 
 /* Address and size of Redundant Environment Sector    */
 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
@@ -233,7 +240,7 @@
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./cpu/ppc4xx/start.S */
+/* see ./arch/powerpc/cpu/ppc4xx/start.S */
 #define CONFIG_SYS_TEMP_STACK_OCM      1
 
 /* On Chip Memory location */
@@ -251,7 +258,7 @@
  * Taken from PPCBoot board/icecube/icecube.h
  */
 
-/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
 #define CONFIG_SYS_EBC_PB0AP           0x04002480
 /* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
 #define CONFIG_SYS_EBC_PB0CR           0xFFC5A000
@@ -269,13 +276,13 @@
  *
  * Taken in part from PPCBoot board/icecube/icecube.h
  */
-/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
-#define CONFIG_SYS_GPIO0_OSRH          0x55555550
-#define CONFIG_SYS_GPIO0_OSRL          0x00000110
-#define CONFIG_SYS_GPIO0_ISR1H         0x00000000
-#define CONFIG_SYS_GPIO0_ISR1L         0x15555445
-#define CONFIG_SYS_GPIO0_TSRH          0x00000000
+/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+#define CONFIG_SYS_GPIO0_OSRL          0x55555550
+#define CONFIG_SYS_GPIO0_OSRH          0x00000110
+#define CONFIG_SYS_GPIO0_ISR1L         0x00000000
+#define CONFIG_SYS_GPIO0_ISR1H         0x15555445
 #define CONFIG_SYS_GPIO0_TSRL          0x00000000
+#define CONFIG_SYS_GPIO0_TSRH          0x00000000
 #define CONFIG_SYS_GPIO0_TCR           0xFFFF8097
 #define CONFIG_SYS_GPIO0_ODR           0x00000000