Merge branch 'master' of git://git.denx.de/u-boot-sparc
[platform/kernel/u-boot.git] / include / configs / qong.h
index f26ced1..e2f7a5e 100644 (file)
@@ -43,7 +43,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       128
 
 /*
  * Hardware drivers
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #endif /* CONFIG_CMD_USB */
 
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SPI
-#define CONFIG_CMD_DATE
-#define BOARD_LATE_INIT
 
-/*
- * You can compile in a MAC address and your custom net settings by using
- * the following syntax.
- *
- * #define CONFIG_ETHADDR              xx:xx:xx:xx:xx:xx
- * #define CONFIG_SERVERIP             <server ip>
- * #define CONFIG_IPADDR               <board ip>
- * #define CONFIG_GATEWAYIP            <gateway ip>
- * #define CONFIG_NETMASK              <your netmask>
- */
+#define BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY       5
 
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addmisc=setenv bootargs ${bootargs}\0"                         \
        "uboot_addr=A0000000\0"                                         \
-       "kernel_addr=A00A0000\0"                                        \
+       "kernel_addr=A00C0000\0"                                        \
        "ramdisk_addr=A0300000\0"                                       \
        "u-boot=qong/u-boot.bin\0"                                      \
        "kernel_addr_r=80800000\0"                                      \
@@ -296,16 +287,20 @@ extern int qong_nand_rdy(void *chip);
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT         "nor0=physmap-flash.0"
+#define MTDIDS_DEFAULT         "nor0=physmap-flash.0,"         \
+                               "nand0=gen_nand"
 #define MTDPARTS_DEFAULT       \
-       "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"     \
-       "128k(env2),2432k(kernel),13m(ramdisk),-(user)"
+       "mtdparts=physmap-flash.0:"                             \
+                       "512k(U-Boot),128k(env1),128k(env2),"   \
+                       "2304k(kernel),13m(ramdisk),-(user);"   \
+               "gen_nand:"                                     \
+                       "128m(nand)"
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_END                IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE               IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 
 #define CONFIG_BOARD_EARLY_INIT_F      1