#ifndef __QEMU_PPCE500_H
#define __QEMU_PPCE500_H
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-
-#define CONFIG_SYS_RAMBOOT
-
-#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
/* Needed to fill the ccsrbar pointer */
/* Virtual address to CCSRBAR */
-#define CONFIG_SYS_CCSRBAR 0xe0000000
+#define CFG_SYS_CCSRBAR 0xe0000000
/* Physical address should be a function call */
#ifndef __ASSEMBLY__
extern unsigned long long get_phys_ccsrbar_addr_early(void);
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32)
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early()
+#define CFG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32)
+#define CFG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early()
#else
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
+#define CFG_SYS_CCSRBAR_PHYS_HIGH 0x0
+#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR
#endif
-/* Virtual address range for PCI region maps */
-#define CONFIG_SYS_PCI_MAP_START 0x80000000
-#define CONFIG_SYS_PCI_MAP_END 0xe0000000
-
/* Virtual address to a temporary map if we need it (max 128MB) */
-#define CONFIG_SYS_TMPVIRT 0xe8000000
+#define CFG_SYS_TMPVIRT 0xe8000000
/*
* DDR Setup
*/
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_CHIP_SELECTS_PER_CTRL 0
-
-#define CONFIG_SYS_CLK_FREQ 33000000
-
-#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
-#define CONFIG_HWCONFIG
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000
+#define CFG_SYS_INIT_RAM_ADDR 0x00100000
+#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0
+#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000
/* The assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
- ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
- CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CFG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CFG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#define CFG_SYS_INIT_RAM_SIZE 0x00004000
-#define CONFIG_LBA48
-
-/* RTC */
-#define CONFIG_RTC_PT7C4338
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Miscellaneous configurable options
* have to be in the first 64 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
/*
* Environment Configuration
*/
-#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
-
-#define CONFIG_BOOTCOMMAND \
- "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0"
#endif /* __QEMU_PPCE500_H */