MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / pxm2.h

diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index e8e0c7e..586a7ed 100644 (file)
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * siemens pxm2
  * (C) Copyright 2013 Siemens Schweiz AG
@@ -7,26 +8,16 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_PXM2_H
 #define __CONFIG_PXM2_H
 
-#define CONFIG_SIEMENS_PXM2
-#define CONFIG_SIEMENS_MACH_TYPE       MACH_TYPE_PXM2
-
 #include "siemens-am33x-common.h"
 
 #define DDR_IOCTRL_VAL         0x18b
 #define DDR_PLL_FREQ           266
 
-#define BOARD_DFU_BUTTON_GPIO  59
-#define BOARD_LCD_POWER                111
-#define BOARD_BACK_LIGHT       112
-#define BOARD_TOUCH_POWER      57
-
 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
        "button_dfu0=59\0" \
        "led0=117,0,1\0" \
@@ -34,18 +25,7 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE       (512 << 20)     /* 1GB */
 
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED           400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_FACTORYSET
-
-#ifndef CONFIG_SPL_BUILD
-
 /* Use common default */
-#define MTDPARTS_DEFAULT       MTDPARTS_DEFAULT_V1
 
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -80,53 +60,4 @@
                "bootm ${kloadaddr}\0" \
        ""
 
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-       "if dfubutton; then " \
-               "run dfu_start; " \
-               "reset; " \
-       "fi; " \
-       "if mmc rescan; then " \
-               "echo SD/MMC found on device ${mmc_dev};" \
-               "if run loadbootenv; then " \
-                       "echo Loaded environment from ${bootenv};" \
-                       "run importbootenv;" \
-               "fi;" \
-               "if test -n $uenvcmd; then " \
-                       "echo Running uenvcmd ...;" \
-                       "run uenvcmd;" \
-               "fi;" \
-               "if run mmc_load_uimage; then " \
-                       "run mmc_args;" \
-                       "bootm ${kloadaddr};" \
-               "fi;" \
-       "fi;" \
-       "run nand_boot;" \
-       "reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND                     \
-       "setenv autoload no; "                  \
-       "dhcp; "                                \
-       "if tftp 80000000 debrick.scr; then "   \
-               "source 80000000; "             \
-       "fi"
-#endif
-#endif /* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#define DA8XX_LCD_CNTL_BASE    LCD_CNTL_BASE
-#define PWM_TICKS      0x1388
-#define PWM_DUTY       0x200
-#endif
-
 #endif /* ! __CONFIG_PXM2_H */