configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / pm9263.h

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index e825270..4856f61 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -25,10 +25,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 
-#define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9263"
-
-#define CONFIG_MACH_TYPE       MACH_TYPE_PM9263
-
 /* clocks */
 #define CONFIG_SYS_MOR_VAL                                             \
                (AT91_PMC_MOR_MOSCEN |                                  \
@@ -140,13 +136,6 @@
                 AT91_WDT_MR_WDDIS |                            \
                 AT91_WDT_MR_WDD(0xfff))
 
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_USER_LOWLEVEL_INIT      1
-
 /*
  * Hardware drivers
  */
@@ -174,7 +163,6 @@
 #define PHYS_FLASH_1                   0x10000000
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT      256
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -190,11 +178,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_NAND              1
-#define CONFIG_JFFS2_DEV               "nand0" /* NAND device jffs2 lives on */
-#define CONFIG_JFFS2_PART_OFFSET       0       /* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_SIZE         (256 * 1024 * 1024) /* partition size*/
-
 /* PSRAM */
 #define        PHYS_PSRAM                      0x70000000
 #define        PHYS_PSRAM_SIZE                 0x00400000      /* 4MB */
@@ -213,8 +196,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
 #define CONFIG_SYS_USE_FLASH   1
 #undef CONFIG_SYS_USE_DATAFLASH
 #undef CONFIG_SYS_USE_NANDFLASH
@@ -222,14 +203,10 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
 /* JFFS Partition offset set */
@@ -239,7 +216,6 @@
 /* 512k reserved for u-boot */
 #define CONFIG_SYS_JFFS2_FIRST_SECTOR  11
 
-#define CONFIG_BOOTCOMMAND             "run flashboot"
 #define CONFIG_ROOTPATH                        "/ronetix/rootfs"
 
 #define CONFIG_CON_ROT                 "fbcon=rotate:3 "
@@ -266,11 +242,6 @@
 #error "Undefined memory device"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
 #define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
                                GENERATED_GBL_DATA_SIZE)