configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / pm9263.h

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 8aab3e1..4856f61 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -1,12 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  * Ilko Iliev <www.ronetix.at>
  *
- * Configuation settings for the RONETIX PM9263 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Configuration settings for the RONETIX PM9263 board.
  */
 
 #ifndef __CONFIG_H
@@ -26,13 +25,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 
-#define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9263"
-#define CONFIG_PM9263          1       /* on a Ronetix PM9263 Board    */
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_TEXT_BASE   0
-
-#define CONFIG_MACH_TYPE       MACH_TYPE_PM9263
-
 /* clocks */
 #define CONFIG_SYS_MOR_VAL                                             \
                (AT91_PMC_MOR_MOSCEN |                                  \
@@ -144,13 +136,6 @@
                 AT91_WDT_MR_WDDIS |                            \
                 AT91_WDT_MR_WDD(0xfff))
 
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_USER_LOWLEVEL_INIT      1
-
 /*
  * Hardware drivers
  */
@@ -169,26 +154,18 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE      1
-#define CONFIG_BOOTP_BOOTPATH          1
-#define CONFIG_BOOTP_GATEWAY           1
-#define CONFIG_BOOTP_HOSTNAME          1
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM             0x20000000
 #define PHYS_SDRAM_SIZE                0x04000000      /* 64 megs */
 
 /* NOR flash, if populated */
-#define CONFIG_SYS_FLASH_CFI           1
-#define CONFIG_FLASH_CFI_DRIVER                1
 #define PHYS_FLASH_1                   0x10000000
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT      256
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_DBW_8          1
@@ -201,12 +178,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_CMDLINE           1
-#define CONFIG_JFFS2_NAND              1
-#define CONFIG_JFFS2_DEV               "nand0" /* NAND device jffs2 lives on */
-#define CONFIG_JFFS2_PART_OFFSET       0       /* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_SIZE         (256 * 1024 * 1024) /* partition size*/
-
 /* PSRAM */
 #define        PHYS_PSRAM                      0x70000000
 #define        PHYS_PSRAM_SIZE                 0x00400000      /* 4MB */
@@ -216,12 +187,6 @@
                                         AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED    | \
                                         AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
-/* Ethernet */
-#define CONFIG_MACB                    1
-#define CONFIG_RMII                    1
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_RESET_PHY_R             1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -231,11 +196,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
 #define CONFIG_SYS_USE_FLASH   1
 #undef CONFIG_SYS_USE_DATAFLASH
 #undef CONFIG_SYS_USE_NANDFLASH
@@ -243,29 +203,12 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_ENV_SPI_MAX_HZ  15000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x60000
-#define CONFIG_ENV_OFFSET_REDUND       0x80000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-
-#define CONFIG_ENV_OFFSET      0x40000
-#define CONFIG_ENV_SECT_SIZE   0x10000
-#define        CONFIG_ENV_SIZE         0x10000
-#define CONFIG_ENV_OVERWRITE   1
-
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK    0
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
@@ -273,7 +216,6 @@
 /* 512k reserved for u-boot */
 #define CONFIG_SYS_JFFS2_FIRST_SECTOR  11
 
-#define CONFIG_BOOTCOMMAND             "run flashboot"
 #define CONFIG_ROOTPATH                        "/ronetix/rootfs"
 
 #define CONFIG_CON_ROT                 "fbcon=rotate:3 "
@@ -300,14 +242,6 @@
 #error "Undefined memory device"
 #endif
 
-#define CONFIG_SYS_LONGHELP            1
-#define CONFIG_CMDLINE_EDITING         1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
 #define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
                                GENERATED_GBL_DATA_SIZE)