Convert CONFIG_SYS_BOOTM_LEN to Kconfig

[platform/kernel/u-boot.git] / include / configs / pico-imx8mq.h

diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 51858ee..d1cc1b9 100644 (file)
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -9,40 +9,21 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SPL_MAX_SIZE            (124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK               0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x2000  /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000 /* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR           0x182000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_ETHPRIME                        "FEC"
-
-#define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_FEC_MXC_PHYADDR         1
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE                   0x30BE0000
 #endif
 
 /* Initial environment variables */
@@ -56,8 +37,8 @@
        "initrd_addr=0x43800000\0"                                      \
        "initrd_high=0xffffffffffffffff\0"                              \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0"              \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0"       \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0"                      \
+       "mmcpart=1\0"   \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0"                  \
        "mmcautodetect=yes\0"                                           \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
        "loadbootscript="                                               \
@@ -82,57 +63,19 @@
                "${get_cmd} ${loadaddr} ${image}; "                     \
                "booti; "
 
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then "                       \
-               "if run loadbootscript; then "                          \
-                       "run bootscript; "                              \
-               "else "                                                 \
-                       "if run loadimage; then "                       \
-                               "run mmcboot; "                         \
-                       "else run netboot; "                            \
-                       "fi; "                                          \
-               "fi; "                                                  \
-       "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET      \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR                \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"        /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 #define PHYS_SDRAM                     0x40000000
 #define PHYS_SDRAM_SIZE                        0x80000000      /* 2 GiB DDR */
 
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
-                                       (PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_IMX_BOOTAUX
+#define CONFIG_MXC_UART_BASE           UART_BASE_ADDR(1)
 
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-
-#define CONFIG_MXC_GPIO
-
-#define CONFIG_OF_SYSTEM_SETUP
-
-#define CONFIG_SYS_BOOTM_LEN           SZ_128M
-
 #endif