#include <linux/sizes.h>
#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>
-#include "imx6_spl.h"
-
-#ifdef CONFIG_SPL_OS_BOOT
-/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000
-
-/* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
-#endif
/* Network support */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET2_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x1
-#define CONFIG_FEC_XCV_TYPE RMII
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */
+#define CFG_FEC_MXC_PHYADDR 0x1
-#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR
+#define CFG_MXC_UART_BASE UART6_BASE_ADDR
/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-#define CONFIG_USBD_HS
+#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS 0
#define DFU_DEFAULT_POLL_TIMEOUT 300
-#define CONFIG_DFU_ENV_SETTINGS \
+#define CFG_DFU_ENV_SETTINGS \
"dfu_alt_info=" \
"spl raw 0x2 0x400;" \
"u-boot raw 0x8a 0x400;" \
"bootmenu_2=Boot using PICO-Pi baseboard=" \
"setenv fdtfile imx6ul-pico-pi.dtb\0" \
-#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"splashpos=m,m\0" \
BOOTMENU_ENV \
"fdt_addr=0x83000000\0" \
"fdt_addr_r=0x83000000\0" \
- "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramdisk_addr_r=0x83000000\0" \
"ramdiskaddr=0x83000000\0" \
- "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"mmcautodetect=yes\0" \
- CONFIG_DFU_ENV_SETTINGS \
+ CFG_DFU_ENV_SETTINGS \
"findfdt=" \
"if test $fdtfile = ask ; then " \
"bootmenu -1; fi;" \
#include <config_distro_bootcmd.h>
#include <linux/stringify.h>
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* I2C configs */
-#define CONFIG_SYS_I2C_MXC
-
-/* environment organization */
-/* Environment starts at 768k = 768 * 1024 = 786432 */
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT 715776
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MXS
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#endif