mmc: complete unfinished move of CONFIG_MMC

[platform/kernel/u-boot.git] / include / configs / pico-imx6ul.h

diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 3e37815..2bd7076 100644 (file)
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -14,11 +14,18 @@
 #include "mx6_common.h"
 #include <asm/imx-common/gpio.h>
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+/* Network support */
+
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE                   ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR         0x1
+#define CONFIG_FEC_XCV_TYPE            RMII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (16 * SZ_1M)
+#define CONFIG_SYS_MALLOC_LEN          (35 * SZ_1M) /* Increase due to DFU */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -30,42 +37,25 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_EMMC_BOOT
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Only OTG1 port enabled */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET
 
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
-
-#define CONFIG_DEFAULT_FDT_FILE                "imx6ul-pico-hobbit.dtb"
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
@@ -80,6 +70,7 @@
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
        "mmcautodetect=yes\0" \
+       "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
                "root=${mmcroot}\0" \
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
@@ -90,7 +81,31 @@
                        "bootz ${loadaddr} - ${fdt_addr}; " \
                "else " \
                        "echo WARN: Cannot load the DT; " \
-               "fi;\0"
+               "fi;\0" \
+       "netargs=setenv bootargs console=${console},${baudrate} " \
+               "root=/dev/nfs " \
+       "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+               "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "${get_cmd} ${image}; " \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootz; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootz; " \
+               "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
           "if mmc rescan; then " \
@@ -100,7 +115,6 @@
                   "fi; " \
           "else run netboot; fi"
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         CONFIG_SYS_MEMTEST_START + SZ_128M
 
@@ -123,6 +137,18 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED           100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
+
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 
@@ -134,7 +160,4 @@
 #define CONFIG_SYS_MMC_ENV_PART                0
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-
 #endif /* __PICO_IMX6UL_CONFIG_H */