Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / phycore_imx8mp.h

diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 0490049..874c94e 100644 (file)
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -29,19 +29,16 @@
 
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PCA9450
 
-#define CONFIG_SYS_I2C
-
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "image=Image\0" \
-       "console=ttymxc1,115200\0" \
+       "console=ttymxc0,115200\0" \
        "fdt_addr=0x48000000\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+       "ip_dyn=yes\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=2\0" \
@@ -57,6 +54,22 @@
                "else " \
                        "echo WARN: Cannot load the DT; " \
                "fi;\0 " \
+       "nfsroot=/nfs\0" \
+       "netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp " \
+               "nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+       "netboot=echo Booting from net ...; " \
+               "run netargs; " \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "${get_cmd} ${loadaddr} ${image}; " \
+               "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+                       "booti ${loadaddr} - ${fdt_addr}; " \
+               "else " \
+                       "echo WARN: Cannot load the DT; " \
+               "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -67,8 +80,6 @@
        "fi;"
 
 /* Link Definitions */
-#define CONFIG_LOADADDR                        0x40480000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE       SZ_512K
@@ -79,15 +90,13 @@
 
 #define CONFIG_MMCROOT                 "/dev/mmcblk2p2"  /* USDHC3 */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          SZ_32M
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 
 #define PHYS_SDRAM                     0x40000000
 #define PHYS_SDRAM_SIZE                        0x80000000
 
 /* UART */
-#define CONFIG_MXC_UART_BASE           UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              SZ_2K
@@ -100,7 +109,4 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
-/* I2C */
-#define CONFIG_SYS_I2C_SPEED           100000
-
 #endif /* __PHYCORE_IMX8MP_H */