#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#define CONFIG_SYS_BOOTM_LEN SZ_64M
-#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_UBOOT_BASE \
+#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x920000
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
-
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CONFIG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcpart=1\0" \
"mmcroot=2\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console} " \
"echo WARN: Cannot load the DT; " \
"fi;\0" \
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi;"
-
/* Link Definitions */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR 0x40000000
+#define CFG_SYS_INIT_RAM_SIZE SZ_512K
-#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CFG_SYS_SDRAM_BASE 0x40000000
-#define PHYS_SDRAM SZ_1G
+#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
-/* UART */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_CBSIZE SZ_2K
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-/* USDHC */
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
-
-/* ENET1 */
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE 0x30BE0000
-
#endif /* __PHYCORE_IMX8MM_H */