rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / pf5200.h

diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index fefdb3c..66ad01f 100644 (file)
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -49,11 +49,7 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 /*
  * Serial console configuration
  */
@@ -74,6 +70,7 @@
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1
 #define CONFIG_PCI_SCAN_SHOW   1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE        1
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
@@ -90,13 +87,6 @@
 #define CFG_RX_ETH_BUFFER      8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
 #endif
-
-#define ADD_PCI_CMD            CFG_CMD_PCI
-
-#else                          /* MPC5100 */
-
-#define ADD_PCI_CMD            0       /* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -106,26 +96,35 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD            0
 #endif
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_FAT    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_IDE    | \
-                                CFG_CMD_BSP    | \
-                                CFG_CMD_ELF    | \
-                                ADD_PCI_CMD      )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+
+#ifdef CONFIG_MPC5200
+#define CONFIG_CMD_PCI
+#endif
+
 
 #if (TEXT_BASE == 0xFF000000)  /* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT         1
@@ -171,7 +170,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
@@ -195,7 +194,7 @@
  */
 #define CFG_FLASH_BASE         0xFE000000
 #define CFG_FLASH_SIZE         0x02000000
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x00000000)
+#define CONFIG_ENV_ADDR                (CFG_FLASH_BASE + 0x00000000)
 #define CFG_MAX_FLASH_BANKS    1       /* max num of memory banks      */
 #define CFG_MAX_FLASH_SECT     512
 
@@ -206,14 +205,14 @@
  * Environment settings
  */
 #if 1                          /* test-only */
-#define CFG_ENV_IS_IN_FLASH    0
-#define CFG_ENV_SIZE           0x10000
-#define CFG_ENV_SECT_SIZE      0x10000
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE                0x10000
+#define CONFIG_ENV_SECT_SIZE   0x10000
 #define CONFIG_ENV_OVERWRITE   1
 #else
-#define CFG_ENV_IS_IN_EEPROM   1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET         0x0000  /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE           0x0400  /* 8192 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM        1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET              0x0000  /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE                0x0400  /* 8192 bytes may be used for env vars */
                                   /* total size of a CAT24WC32 is 8192 bytes */
 #define CONFIG_ENV_OVERWRITE   1
 #endif
@@ -263,7 +262,7 @@
  */
 #define CFG_LONGHELP           /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -281,6 +280,11 @@
 
 #define CFG_VXWORKS_MAC_PTR    0x00000000      /* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */