+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) Stefano Babic <sbabic@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
-
#ifndef __PCM058_CONFIG_H
#define __PCM058_CONFIG_H
-#include <config_distro_defaults.h>
-
#ifdef CONFIG_SPL
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
#include "imx6_spl.h"
#endif
#include "mx6_common.h"
-/* Thermal */
-#define CONFIG_IMX_THERMAL
-
-/* Serial */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONSOLE_DEV "ttymxc1"
-
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
-/* Early setup */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
-/* Ethernet */
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 3
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_KSZ9031
-
-/* SPI Flash */
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 20000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_NAND
/* Enable NAND support */
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-/* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
-
-/* Filesystem support */
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT "nand0=nand"
-#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-
-/* Various command support */
-#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
-#define CONFIG_CMD_GSC
-#define CONFIG_RBTREE
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 1
-
/* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE (16 * 1024)
-#define CONFIG_ENV_OFFSET (1024 * SZ_1K)
-#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
-#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET (0x1E0000)
-#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
-#endif
-
+#define ENV_MMC \
+ "mmcdev=0\0" \
+ "mmcpart=2\0" \
+ "fitpart=1\0" \
+ "mmcrootfstype=ext4\0" \
+ "fitname=fitImage\0" \
+ "mmcloadfit=load mmc ${mmcdev}:${fitpart} ${loadaddr} ${fitname}\0" \
+ "mmcargs=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcpart} " \
+ "rootfstype=${mmcrootfstype} ${optargs}\0" \
+ "mmcboot=run mmcloadfit;run mmcargs;bootm ${loadaddr}\0"
+
+#define ENV_NAND \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ "nandroot=ubi0:root ubi.mtd=rootfs\0" \
+ "nandrootfstype=ubifs\0" \
+ "nandargs=setenv bootargs root=${nandroot} " \
+ "rootfstype=${nandrootfstype} ${mtdparts} ${optargs}\0" \
+ "nandloadfit=ubi part rootfs;ubi readvol ${loadaddr} fit\0" \
+ "nandboot=run nandloadfit;run nandargs;bootm ${loadaddr}\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x30000000\0" \
+ "optargs=rw rootwait\0" \
+ ENV_MMC \
+ ENV_NAND
+
+#define CONFIG_BOOTCOMMAND "run mmcboot;run nandboot"
#endif