Convert CONFIG_CMD_EEPROM et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / pcm030.h

diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index dce5c25..406f3e5 100644 (file)
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -44,14 +44,11 @@ Serial console configuration
                                        /*define gps port conf. */
                                        /* register later on to */
                                        /*enable UART function! */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_PCI
 
@@ -113,8 +110,6 @@ IPB Bus clocking configuration.
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  * -----------------------------------------------------------------------*/
-#define CONFIG_PCI                     1
-#define CONFIG_PCI_PNP                 1
 #define CONFIG_PCI_SCAN_SHOW           1
 #define CONFIG_PCI_MEM_BUS             0x40000000
 #define CONFIG_PCI_MEM_PHYS            CONFIG_PCI_MEM_BUS
@@ -125,31 +120,6 @@ IPB Bus clocking configuration.
 #define CONFIG_SYS_XLB_PIPELINING      1
 
 /*---------------------------------------------------------------------------
- I2C configuration
----------------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*---------------------------------------------------------------------------
- EEPROM CAT24WC32 configuration
----------------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x52    /* 1010100x */
-#define CONFIG_SYS_I2C_FACT_ADDR       0x52    /* EEPROM CAT24WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2       /* Bytes of address */
-#define CONFIG_SYS_EEPROM_SIZE         2048
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
-
-/*---------------------------------------------------------------------------
-RTC configuration
----------------------------------------------------------------------------*/
-#define RTC
-#define CONFIG_RTC_PCF8563             1
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
-/*---------------------------------------------------------------------------
  Flash configuration
 ---------------------------------------------------------------------------*/
 
@@ -176,11 +146,10 @@ RTC configuration
  Environment settings
 ---------------------------------------------------------------------------*/
 
-/* pcm030 ships with environment is EEPROM by default */
-#define CONFIG_ENV_IS_IN_EEPROM        1
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_OFFSET      0x00    /* environment starts at the */
                                        /*beginning of the EEPROM */
-#define CONFIG_ENV_SIZE                CONFIG_SYS_EEPROM_SIZE
+#define CONFIG_ENV_SIZE                2048
 
 #define CONFIG_ENV_OVERWRITE   1
 
@@ -398,9 +367,6 @@ RTC configuration
 #define CONFIG_SYS_ATA_STRIDE          4
 #define CONFIG_ATAPI                   1
 
-/* we enable IDE and FAT support, so we also need partition support */
-#define CONFIG_DOS_PARTITION 1
-
 /* USB */
 #define CONFIG_USB_OHCI