Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

[platform/kernel/u-boot.git] / include / configs / p3p440.h

diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 1dc8656..20a0755 100644 (file)
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -39,6 +39,9 @@
 #define CONFIG_4xx             1           /* ... PPC4xx family        */
 #define CONFIG_BOARD_EARLY_INIT_F 1        /* Call board_early_init_f  */
 #define CONFIG_MISC_INIT_R     1           /* Call misc_init_r         */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+
 #define CONFIG_SYS_CLK_FREQ    33333333    /* external freq to pll     */
 
 /*-----------------------------------------------------------------------
@@ -49,7 +52,6 @@
 #define CONFIG_SYS_FLASH_BASE      0xff800000      /* start of FLASH           */
 #define CONFIG_SYS_MONITOR_BASE    0xfffc0000      /* start of monitor         */
 #define CONFIG_SYS_PCI_MEMBASE     0x80000000      /* mapped pci memory        */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000      /* internal peripherals     */
 #define CONFIG_SYS_ISRAM_BASE      0xc0000000      /* internal SRAM            */
 #define CONFIG_SYS_PCI_BASE        0xd0000000      /* internal PCI regs        */
 
@@ -59,10 +61,10 @@
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_ISRAM_BASE  /* Initial RAM address   */
-#define CONFIG_SYS_INIT_RAM_END        0x2000      /* End of used area in RAM  */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000      /* Size of used area in RAM */
 #define CONFIG_SYS_GBL_DATA_SIZE       128         /* num bytes initial data   */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Mon*/
@@ -80,6 +82,12 @@
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
 
@@ -92,6 +100,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 #define CONFIG_SYS_I2C_NOPROBES        {0x69}  /* Don't probe these addrs      */
@@ -158,6 +167,7 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0x1c    /* PHY address                  */
 #define CONFIG_HAS_ETH1
@@ -311,14 +321,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */