configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig

[platform/kernel/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 8fda0c1..d9312bd 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -74,7 +74,6 @@
 #if defined(CONFIG_TARGET_P1021RDB)
 #define CONFIG_BOARDNAME "P1021RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SYS_LBC_LBCR    0x00080000      /* Implement conversion of
                                                addresses in the LBC */
@@ -105,7 +104,6 @@
 #if defined(CONFIG_TARGET_P1025RDB)
 #define CONFIG_BOARDNAME "P1025RDB"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
 #define CONFIG_SLIC
 
 #define CONFIG_SYS_LBC_LBCR    0x00080000      /* Implement conversion of
@@ -137,7 +135,6 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SPL_MAX_SIZE            (128 * 1024)
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
@@ -145,8 +142,6 @@
 #define CONFIG_SYS_MMC_U_BOOT_START    (0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
-#define CONFIG_SPL_MMC_BOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_COMMON_INIT_DDR
 #endif
@@ -156,7 +151,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_SPL_MAX_SIZE            (128 * 1024)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
@@ -164,8 +158,6 @@
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
-#define CONFIG_SPL_SPI_BOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_COMMON_INIT_DDR
 #endif
@@ -173,7 +165,6 @@
 
 #ifdef CONFIG_NAND
 #ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_SPL_COMMON_INIT_DDR
@@ -188,7 +179,6 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0xff800000
 #define CONFIG_SPL_MAX_SIZE            4096
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0xf8f80000
@@ -199,7 +189,6 @@
 #define CONFIG_SPL_PAD_TO              0x20000
 #define CONFIG_TPL_PAD_TO              0x20000
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -577,11 +566,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#if defined(CONFIG_SPI_FLASH)
-#define CONFIG_SF_DEFAULT_SPEED        10000000
-#define CONFIG_SF_DEFAULT_MODE 0
-#endif
-
 #if defined(CONFIG_PCI)
 /*
  * General PCI
@@ -660,7 +644,6 @@
 
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FW_ADDR  0xefec0000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #endif /* CONFIG_QE */
@@ -705,10 +688,6 @@
  * Environment
  */
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_ENV_SPI_BUS     0
-#define CONFIG_ENV_SPI_CS      0
-#define CONFIG_ENV_SPI_MAX_HZ  10000000
-#define CONFIG_ENV_SPI_MODE    0
 #define CONFIG_ENV_SIZE                0x2000  /* 8KB */
 #define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE   0x10000