Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

[platform/kernel/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5689113..c8d5e89 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -116,7 +116,6 @@
 #if defined(CONFIG_TARGET_P1024RDB)
 #define CONFIG_BOARDNAME "P1024RDB"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_P1024
 #define CONFIG_SLIC
 #define __SW_BOOT_MASK         0xf3
 #define __SW_BOOT_NOR          0x00
@@ -129,7 +128,6 @@
 #if defined(CONFIG_TARGET_P1025RDB)
 #define CONFIG_BOARDNAME "P1025RDB"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_P1025
 #define CONFIG_QE
 #define CONFIG_SLIC
 
@@ -146,7 +144,6 @@
 #if defined(CONFIG_TARGET_P2020RDB)
 #define CONFIG_BOARDNAME "P2020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_P2020
 #define CONFIG_VSC7385_ENET
 #define __SW_BOOT_MASK         0x03
 #define __SW_BOOT_NOR          0xc8
@@ -177,7 +174,6 @@
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
@@ -198,7 +194,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SPL_PAD_TO              0x20000
@@ -263,10 +258,6 @@
 #endif
 #endif
 
-/* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500
-
 #define CONFIG_MP
 
 #define CONFIG_FSL_ELBC
@@ -277,7 +268,6 @@
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_LAW
 #define CONFIG_TSEC_ENET       /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
@@ -301,8 +291,6 @@
 #define CONFIG_L2_CACHE
 #define CONFIG_BTB
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
-
 #define CONFIG_ENABLE_36BIT_PHYS
 
 #ifdef CONFIG_PHYS_64BIT
@@ -324,7 +312,6 @@
 #endif
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 1
@@ -342,7 +329,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 
 /* Default settings for DDR3 */
@@ -852,8 +838,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #endif
 
-#define CONFIG_MMC
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR