#include <linux/stringify.h>
#if defined(CONFIG_TARGET_P1020RDB_PC)
-#define CONFIG_BOARDNAME "P1020RDB-PC"
-#define CONFIG_NAND_FSL_ELBC
#define CONFIG_VSC7385_ENET
#define CONFIG_SLIC
#define __SW_BOOT_MASK 0x03
#define __SW_BOOT_SD 0x9c
#define __SW_BOOT_NAND 0xec
#define __SW_BOOT_PCIE 0x6c
+#define __SW_NOR_BANK_MASK 0xfd
+#define __SW_NOR_BANK_UP 0x00
+#define __SW_NOR_BANK_LO 0x02
#define CONFIG_SYS_L2_SIZE (256 << 10)
#endif
* 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
*/
#if defined(CONFIG_TARGET_P1020RDB_PD)
-#define CONFIG_BOARDNAME "P1020RDB-PD"
-#define CONFIG_NAND_FSL_ELBC
#define CONFIG_VSC7385_ENET
#define CONFIG_SLIC
#define __SW_BOOT_MASK 0x03
#define __SW_BOOT_SD 0x24
#define __SW_BOOT_NAND 0x44
#define __SW_BOOT_PCIE 0x74
+#define __SW_NOR_BANK_MASK 0xfd
+#define __SW_NOR_BANK_UP 0x00
+#define __SW_NOR_BANK_LO 0x02
#define CONFIG_SYS_L2_SIZE (256 << 10)
/*
* Dynamic MTD Partition support with mtdparts
#endif
#if defined(CONFIG_TARGET_P2020RDB)
-#define CONFIG_BOARDNAME "P2020RDB-PC"
-#define CONFIG_NAND_FSL_ELBC
#define CONFIG_VSC7385_ENET
#define __SW_BOOT_MASK 0x03
#define __SW_BOOT_NOR 0xc8
#define __SW_BOOT_SPI 0x28
-#define __SW_BOOT_SD 0x68 /* or 0x18 */
+#define __SW_BOOT_SD 0x68
+#define __SW_BOOT_SD2 0x18
#define __SW_BOOT_NAND 0xe8
#define __SW_BOOT_PCIE 0xa8
+#define __SW_NOR_BANK_MASK 0xfd
+#define __SW_NOR_BANK_UP 0x00
+#define __SW_NOR_BANK_LO 0x02
#define CONFIG_SYS_L2_SIZE (512 << 10)
/*
* Dynamic MTD Partition support with mtdparts
#endif
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO 0x20000
-#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_COMMON_INIT_DDR
#endif
-#endif
-
-#ifdef CONFIG_SPIFLASH
+#elif defined(CONFIG_SPIFLASH)
#define CONFIG_SPL_SPI_FLASH_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO 0x20000
-#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_COMMON_INIT_DDR
#endif
-#endif
-
-#ifdef CONFIG_MTD_RAW_NAND
+#elif defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_NAND_INIT
#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SPL_MAX_SIZE (128 << 10)
-#define CONFIG_TPL_TEXT_BASE 0xf8f81000
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_MAX_SIZE 4096
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10)
+#else
+#ifndef CONFIG_MPC85XX_HAVE_RESET_VECTOR
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#endif
#endif /* not CONFIG_TPL_BUILD */
-#define CONFIG_SPL_PAD_TO 0x20000
-#define CONFIG_TPL_PAD_TO 0x20000
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#endif
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-#ifndef CONFIG_SYS_MONITOR_BASE
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-#endif
-
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
-#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LBA48
-#if defined(CONFIG_TARGET_P2020RDB)
-#define CONFIG_SYS_CLK_FREQ 100000000
-#else
-#define CONFIG_SYS_CLK_FREQ 66666666
-#endif
-#define CONFIG_DDR_CLK_FREQ 66666666
-
#define CONFIG_HWCONFIG
/*
* These can be toggled for performance analysis, otherwise use default.
*/
#define CONFIG_L2_CACHE
-#define CONFIG_BTB
#define CONFIG_ENABLE_36BIT_PHYS
/* DDR Setup */
#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
#define CONFIG_SYS_SPD_BUS_NUM 1
#define SPD_EEPROM_ADDRESS 0x52
#if defined(CONFIG_TARGET_P1020RDB_PD)
#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
-#define CONFIG_CHIP_SELECTS_PER_CTRL 2
#else
#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G
-#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#endif
#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-
/* Default settings for DDR3 */
#ifndef CONFIG_TARGET_P2020RDB
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#if defined(CONFIG_TARGET_P1020RDB_PD)
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-#else
-#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
-#endif
#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
#define CONFIG_SYS_CPLD_BASE 0xffa00000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
#endif
/* CPLD config size: 1Mb */
-#define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
- BR_PS_8 | BR_V)
-#define CONFIG_CPLD_OR_PRELIM (0xfff009f7)
#define CONFIG_SYS_PMC_BASE 0xff980000
#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
OR_GPCM_EAD)
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#else
-#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-#endif
-#define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */
-#define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */
-
/* Vsc7385 switch */
#ifdef CONFIG_VSC7385_ENET
-#define __VSCFW_ADDR "vscfw_addr=ef000000"
+#define __VSCFW_ADDR "vscfw_addr=ef000000\0"
#define CONFIG_SYS_VSC7385_BASE 0xffb00000
#ifdef CONFIG_PHYS_64BIT
OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
-#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM
-#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM
-
/* The size of the VSC7385 firmware image */
#define CONFIG_VSC7385_IMAGE_SIZE 8192
#endif
+#ifndef __VSCFW_ADDR
+#define __VSCFW_ADDR ""
+#endif
+
/*
* Config the L2 Cache as L2 SRAM
*/
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
+#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)
#define CONFIG_NS16550_MIN_FUNCTIONS
#endif
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define TSEC3_PHYIDX 0
-
-#define CONFIG_ETHPRIME "eTSEC1"
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
#endif /* CONFIG_TSEC_ENET */
-#ifdef CONFIG_QE
-/* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FW_ADDR 0xefec0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
-#endif /* CONFIG_QE */
-
/*
* Environment
*/
#if defined(CONFIG_HAS_FSL_DR_USB)
#ifdef CONFIG_USB_EHCI_HCD
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
#endif
#endif
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#endif
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-
/*
* Environment Configuration
*/
#define CONFIG_HOSTNAME "unknown"
#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR 1000000
-
#ifdef __SW_BOOT_NOR
#define __NOR_RST_CMD \
-norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+norboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NOR 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
#endif
#ifdef __SW_BOOT_SPI
#define __SPI_RST_CMD \
-spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+spiboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SPI 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
#endif
#ifdef __SW_BOOT_SD
#define __SD_RST_CMD \
-sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+sdboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SD 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
#endif
#ifdef __SW_BOOT_NAND
#define __NAND_RST_CMD \
-nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+nandboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NAND 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
#endif
#ifdef __SW_BOOT_PCIE
#define __PCIE_RST_CMD \
-pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+pciboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_PCIE 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"nandbootaddr=100000\0" \
"nandfdtaddr=80000\0" \
"ramdisk_size=120000\0" \
-"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
-"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
-__stringify(__VSCFW_ADDR)"\0" \
+__VSCFW_ADDR \
+"map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_LO)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \
+"map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_UP)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \
__stringify(__NOR_RST_CMD)"\0" \
__stringify(__SPI_RST_CMD)"\0" \
__stringify(__SD_RST_CMD)"\0" \
__stringify(__NAND_RST_CMD)"\0" \
__stringify(__PCIE_RST_CMD)"\0"
-#define NFSBOOTCOMMAND \
-"setenv bootargs root=/dev/nfs rw " \
-"nfsroot=$serverip:$rootpath " \
-"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-"console=$consoledev,$baudrate $othbootargs;" \
-"tftp $loadaddr $bootfile;" \
-"tftp $fdtaddr $fdtfile;" \
-"bootm $loadaddr - $fdtaddr"
-
-#define HDBOOT \
-"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
-"console=$consoledev,$baudrate $othbootargs;" \
-"usb start;" \
-"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
-"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
-"bootm $loadaddr - $fdtaddr"
-
#define CONFIG_USB_FAT_BOOT \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs " \
"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
"bootm $norbootaddr - $norfdtaddr"
-#define RAMBOOTCOMMAND \
-"setenv bootargs root=/dev/ram rw " \
-"console=$consoledev,$baudrate $othbootargs " \
-"ramdisk_size=$ramdisk_size;" \
-"tftp $ramdiskaddr $ramdiskfile;" \
-"tftp $loadaddr $bootfile;" \
-"tftp $fdtaddr $fdtfile;" \
-"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND HDBOOT
-
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff