Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD

[platform/kernel/u-boot.git] / include / configs / ot1200.h

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 1596ad8..cfa6199 100644 (file)
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -10,34 +10,17 @@
 
 #include "mx6_common.h"
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
-#define CONFIG_MXC_GPIO
-
-/* FUSE Configs */
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
 
 /* UART Configs */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* SF Configs */
-#define CONFIG_CMD_SF
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  2
 #define CONFIG_SF_DEFAULT_CS   0
@@ -52,9 +35,10 @@
 #define CONFIG_CMD_PCA953X_INFO
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED            100000
 
@@ -67,20 +51,11 @@
 #define IMX_OTPWRITE_ENABLED
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
@@ -101,21 +76,13 @@
 #define CONFIG_LIBATA
 #endif
 
-
 /* SPL */
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
@@ -132,40 +99,12 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #endif
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                115200
-
-/* Command definition */
-
-#define CONFIG_BOOTDELAY               2
-
 #define CONFIG_PREBOOT                 ""
 
-#define CONFIG_LOADADDR                0x12000000
-#define CONFIG_SYS_TEXT_BASE           0x17800000
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CBSIZE              1024
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -191,24 +130,6 @@
 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* FS Configs */
-#define CONFIG_CMD_EXT3
-#define CONFIG_CMD_EXT4
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_LIB_UUID
-#define CONFIG_CMD_FS_UUID
-
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_BOOTFILE