+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2013
* Texas Instruments Incorporated.
*
* Configuration settings for the TI EVM5430 board.
* See ti_omap5_common.h for omap5 common settings.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_OMAP5_EVM_H
#define __CONFIG_OMAP5_EVM_H
+#include <environment/ti/dfu.h>
+
#ifndef CONFIG_SPL_BUILD
/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
#endif
-#define DFU_ALT_INFO_MMC \
- "dfu_alt_info_mmc=" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "MLO fat 0 1;" \
- "MLO.raw raw 0x100 0x100;" \
- "u-boot.img.raw raw 0x300 0x400;" \
- "spl-os-args.raw raw 0x80 0x80;" \
- "spl-os-image.raw raw 0x900 0x2000;" \
- "spl-os-args fat 0 1;" \
- "spl-os-image fat 0 1;" \
- "u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1\0"
-
-#define DFU_ALT_INFO_EMMC \
- "dfu_alt_info_emmc=" \
- "rawemmc raw 0 3751936;" \
- "boot part 1 1;" \
- "rootfs part 1 2;" \
- "MLO fat 1 1;" \
- "MLO.raw raw 0x100 0x100;" \
- "u-boot.img.raw raw 0x300 0x400;" \
- "spl-os-args.raw raw 0x80 0x80;" \
- "spl-os-image.raw raw 0x900 0x2000;" \
- "spl-os-args fat 1 1;" \
- "spl-os-image fat 1 1;" \
- "u-boot.img fat 1 1;" \
- "uEnv.txt fat 1 1\0"
-
-#define DFU_ALT_INFO_RAM \
- "dfu_alt_info_ram=" \
- "kernel ram 0x80200000 0x4000000;" \
- "fdt ram 0x80f80000 0x80000;" \
- "ramdisk ram 0x81000000 0x4000000\0"
-
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
#include <configs/ti_omap5_common.h>
-#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_MISC_INIT_R
/* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_ENV_OFFSET 0xE0000
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
#define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT
/* Required support for the TCA642X GPIO we have on the uEVM */
#define CONFIG_TCA642X
-#define CONFIG_CMD_TCA642X
#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
/* USB UHH support options */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
/* Enabled commands */
/* USB Networking options */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-
-#define CONSOLEDEV "ttyO2"
-/* Max time to hold reset on this board, see doc/README.omap-reset-time */
-#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
+#define CONSOLEDEV "ttyS2"
-#define CONFIG_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
#define CONFIG_SYS_SCSI_MAX_LUN 1