Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
[platform/kernel/u-boot.git] / include / configs / omap5_evm.h
index 38b5028..623da77 100644 (file)
@@ -38,6 +38,7 @@
 #define CONFIG_OMAP54XX        /* which is a 54XX */
 #define CONFIG_OMAP5430        /* which is in a 5430 */
 #define CONFIG_5430EVM /* working with EVM */
+#define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
 /* Clock Defines */
 #define V_OSCK                 19200000        /* Clock output from T2 */
 #define V_SCLK V_OSCK
-#define CONFIG_SYS_CLOCKS_ENABLE_ALL   1       /* Enable all clocks */
-#define CONFIG_SYS_ENABLE_PADS_ALL     1       /* Enable all PADS for now */
 
-#undef CONFIG_USE_IRQ  /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
 
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "OMAP5430 EVM # "
 #define CONFIG_SYS_CBSIZE              256
 /* Print Buffer Size */
 #define CONFIG_SYS_HZ                  1000
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack */
-#endif
-
-/*
  * SDRAM Memory Map
  * Even though we use two CS all the memory
  * is mapped to one contiguous block
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_RAM_ADDR       0x4030D800
-#define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
                                         GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x40300350
 #define CONFIG_SPL_MAX_SIZE            0x19000 /* 100K */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_DISPLAY_PRINT
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's