#define CONFIG_OMAP44XX 1 /* which is a 44XX */
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
#define CONFIG_PANDA 1 /* working with Panda */
+#define CONFIG_ARCH_CPU_INIT
/* Get CPU defs */
#include <asm/arch/cpu.h>
*/
#define CONFIG_ENV_SIZE (256 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
/* initial data */
/* Vector Base */
#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_DRIVER_OMAP34XX_I2C 1
#define CONFIG_I2C_MULTI_BUS 1
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER 1
+
/* MMC */
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_SYS_MMC_SET_DEV 1
#define CONFIG_DOS_PARTITION 1
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
#undef CONFIG_CMD_IMLS /* List all found images */
/*
- * Enabling relocation of u-boot by default
- * Relocation can be skipped if u-boot is copied to the TEXT_BASE
- */
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
-/*
* Environment setup
*/
-/* allow overwriting serial config and ethaddr */
+#define CONFIG_BOOTDELAY 3
+
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
- "mmcdev=1\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init ${mmcdev}; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loaduimage; then " \
"run mmcboot; " \
- "else run nandboot; " \
"fi; " \
"fi; " \
"fi"
#define CONFIG_SYS_LOAD_ADDR 0x80000000
/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT1_BASE
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ 1000
*/
#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */