ARM: Remove unused stack and irq config defines

[platform/kernel/u-boot.git] / include / configs / omap4_common.h

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index a989721..ee0c4b9 100644 (file)
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -35,7 +35,7 @@
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP44XX                1       /* which is a 44XX */
 #define CONFIG_OMAP4430                1       /* which is in a 4430 */
-#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -49,7 +49,6 @@
 #define V_OSCK                 38400000        /* Clock output from T2 */
 #define V_SCLK                   V_OSCK
 
-#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT               1
@@ -106,7 +105,6 @@
 #define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
 #define CONFIG_OMAP_HSMMC              1
-#define CONFIG_SYS_MMC_SET_DEV         1
 #define CONFIG_DOS_PARTITION           1
 
 
@@ -122,9 +120,6 @@
 /* Flash */
 #define CONFIG_SYS_NO_FLASH    1
 
-/* clocks */
-#define CONFIG_SYS_CLOCKS_ENABLE_ALL
-
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -151,6 +146,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
        "console=ttyO2,115200n8\0" \
+       "fdt_high=0xffffffff\0" \
        "usbtty=cdc_acm\0" \
        "vram=16M\0" \
        "mmcdev=0\0" \
@@ -187,7 +183,6 @@
 
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_CBSIZE              512
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -211,17 +206,6 @@
 #define CONFIG_SYS_HZ                  1000
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack */
-#endif
-
-/*
  * SDRAM Memory Map
  * Even though we use two CS all the memory
  * is mapped to one contiguous block
@@ -229,10 +213,7 @@
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_RAM_ADDR       0x4030D800
-#define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
                                         GENERATED_GBL_DATA_SIZE)
 
 #ifndef CONFIG_SYS_L2CACHE_OFF
@@ -253,7 +234,7 @@
 #define CONFIG_SPL
 #define CONFIG_SPL_TEXT_BASE           0x40304350
 #define CONFIG_SPL_MAX_SIZE            (38 * 1024)
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -283,8 +264,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#define CONFIG_SYS_ENABLE_PADS_ALL
+#define CONFIG_SYS_THUMB_BUILD
 
 #endif /* __CONFIG_OMAP4_COMMON_H */