OMAP3: Remove unused PHYS_SDRAM_1_SIZE

[platform/kernel/u-boot.git] / include / configs / omap3_zoom2.h

diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 2a56182..a6b48a8 100644 (file)
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -35,8 +35,8 @@
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
-#define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_ZOOM2     1       /* working with Zoom II */
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -53,7 +53,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
@@ -77,12 +76,11 @@
  * NS16550 Configuration
  * Zoom2 uses the TL16CP754C on the debug board
  */
-#define CONFIG_SERIAL_MULTI            1
 /*
  * 0 - 1 : first  USB with respect to the left edge of the debug board
  * 2 - 3 : second USB with respect to the left edge of the debug board
  */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE    (&zoom2_serial_device0)
+#define ZOOM2_DEFAULT_SERIAL_DEVICE    0
 
 #define V_NS16550_CLK                  (1843200)       /* 1.8432 Mhz */
 
@@ -95,13 +93,11 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR                1
-
 /* Status LED */
 #define CONFIG_STATUS_LED              1 /* Status LED enabled */
 #define CONFIG_BOARD_SPECIFIC_LED      1
@@ -200,7 +196,7 @@
 
 #define CONFIG_SYS_PROMPT              "OMAP3 Zoom2 # "
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SYS_CBSIZE              512
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS             16
@@ -221,27 +217,12 @@
 #define CONFIG_SYS_HZ                  ((V_SCLK) / (2 << CONFIG_SYS_PTV))
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using these settings
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
-#endif
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C             1
-
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -268,4 +249,6 @@
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
 #endif /* __CONFIG_H */