Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / omap3_zoom1.h

diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 9e000ed..f612e0f 100644 (file)
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -28,17 +28,18 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_ZOOM1     1       /* working with Zoom MDK Rev1 */
 
+#define CONFIG_SDRC    /* The chip has SDRC controller */
+
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
@@ -63,9 +64,9 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE                        SZ_128K /* Total Size Environment */
+#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
                                                /* initial data */
 
@@ -99,6 +100,24 @@
 #define CONFIG_OMAP3_MMC               1
 #define CONFIG_DOS_PARTITION           1
 
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR                1
+
+/* USB */
+#define CONFIG_MUSB_UDC                        1
+#define CONFIG_USB_OMAP3               1
+#define CONFIG_TWL4030_USB             1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE              1
+#define CONFIG_USB_TTY                 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID           0x0451
+#define CONFIG_USBD_PRODUCTID          0x5678
+#define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME       "Zoom1"
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -119,6 +138,7 @@
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
@@ -126,6 +146,12 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER           1
+#define CONFIG_TWL4030_LED             1
+
+/*
  * Board NAND Info.
  */
 #define CONFIG_NAND_OMAP_GPMC
@@ -151,6 +177,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
+       "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
        "videomode=1024x768@60,vxres=1024,vyres=768\0" \
        "videospec=omapfb:vram:2M,vram:4M\0" \
@@ -190,12 +217,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT                       "OMAP3 Zoom1# "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              V_PROMPT
+#define CONFIG_SYS_PROMPT              "OMAP3 Zoom1 # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -226,10 +251,10 @@
  *
  * The stack sizes are set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE       SZ_128K /* regular stack */
+#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
 #ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   SZ_4K   /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   SZ_4K   /* FIQ stack */
+#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -237,7 +262,7 @@
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      SZ_32M  /* at least 32 meg */
+#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
 /* SDRAM Bank Allocation method */
@@ -256,7 +281,7 @@
 #define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
                                                /* one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN         SZ_256K /* Reserve 2 sectors */
+#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE          boot_flash_base
 
@@ -288,8 +313,6 @@
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
 
 #ifndef __ASSEMBLY__
-extern gpmc_csx_t *nand_cs_base;
-extern gpmc_t *gpmc_cfg_base;
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;