common/Kconfig: Add DISPLAY_CPUINFO
[platform/kernel/u-boot.git] / include / configs / omap3_pandora.h
index a8af1c5..ad20b55 100644 (file)
@@ -21,7 +21,6 @@
 /*
  * Display CPU and Board information
  */
-#define CONFIG_DISPLAY_CPUINFO         1
 #define CONFIG_DISPLAY_BOARDINFO       1
 
 #define CONFIG_MISC_INIT_R
@@ -49,7 +48,7 @@
 /*
  * NS16550 Configuration
  */
-#undef CONFIG_OMAP_SERIAL
+#undef CONFIG_SYS_NS16550_CLK
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
 #define CONFIG_SERIAL3                 3
 
 /* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE       /* Cache control                */
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
-#undef CONFIG_CMD_NFS          /* NFS support                  */
 
 /*
  * Board NAND Info.
  */
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_SW
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
 #define CONFIG_SYS_NAND_OOBSIZE                64
 
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_UBI         /* UBI-formated MTD partition support */
 #define CONFIG_CMD_UBIFS       /* Read-only UBI volume operations */
 
 #define CONFIG_RBTREE          /* required by CONFIG_CMD_UBI */
 #define MTDPARTS_DEFAULT
 #endif
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       DEFAULT_LINUX_BOOT_ENV \
-       "usbtty=cdc_acm\0" \
-       "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
-               "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
-                       "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
+       "run distro_bootcmd; " \
+       "setenv bootargs ${bootargs_ubi}; " \
+       "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
                "source ${loadaddr}; " \
        "fi; " \
        "ubi part boot && ubifsmount ubi:boot && " \
                "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_PROMPT
-#define CONFIG_SYS_PROMPT              "Pandora # "
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       "usbtty=cdc_acm\0" \
+       "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
+               "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
+       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       BOOTENV \
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-#define CONFIG_SYS_CACHELINE_SIZE      64
-
 #endif                         /* __CONFIG_H */