Merge branch 'master' of git://git.denx.de/u-boot-mmc

[platform/kernel/u-boot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 7b97be9..c58636a 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -35,6 +35,13 @@
 /* TWL4030 LED */
 #define CONFIG_TWL4030_LED
 
+/* USB EHCI */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       183
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
+
 /* Initialize GPIOs by default */
 #define CONFIG_OMAP3_GPIO_2    /* GPIO32..63 is in GPIO Bank 2 */
 #define CONFIG_OMAP3_GPIO_3    /* GPIO64..95 is in GPIO Bank 3 */
@@ -44,6 +51,7 @@
 
 /* commands to include */
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_USB
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
 #undef CONFIG_CMD_IMI          /* iminfo                       */
 #undef CONFIG_CMD_NFS          /* NFS support                  */
@@ -83,7 +91,6 @@
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
-       "fdtfile=overo.dtb\0" \
        "bootdir=/boot\0" \
        "bootfile=zImage\0" \
        "usbtty=cdc_acm\0" \
@@ -132,8 +139,9 @@
                "bootz ${loadaddr} - ${fdtaddr}\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${loadaddr} linux; " \
-               "bootm ${loadaddr}\0" \
+               "if nand read ${loadaddr} linux; then " \
+                       "bootm ${loadaddr};" \
+               "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -152,10 +160,11 @@
                        "run mmcboot;" \
                "fi;" \
                "if run loadzimage; then " \
-                       "if test -n $fdtfile; then " \
-                               "if run loadfdt; then " \
-                                       "run mmcbootfdt;" \
-                               "fi;" \
+                       "if test -z \"${fdtfile}\"; then " \
+                               "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
+                       "fi;" \
+                       "if run loadfdt; then " \
+                               "run mmcbootfdt;" \
                        "fi;" \
                "fi;" \
        "fi;" \
@@ -173,12 +182,8 @@
                                        0x01F00000) /* 31MB */
 
 /* FLASH and environment organization */
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
-
 #if defined(CONFIG_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #endif
 
 /* Monitor at start of flash */
@@ -206,6 +211,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE      64
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -219,5 +225,11 @@
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS                0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
+#endif
 
 #endif                         /* __CONFIG_H */