ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE

[platform/kernel/u-boot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 0c12b9f..79a5b85 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -23,12 +23,14 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_OVERO     1       /* working with overo */
 
+#define CONFIG_SDRC    /* The chip has SDRC controller */
+
 #include <asm/arch/cpu.h>      /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
@@ -56,7 +58,6 @@
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
                                                /* initial data */
 
 /*
@@ -85,8 +86,9 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, \
                                        115200}
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
 /* DDR - I use Micron DDR */
@@ -95,6 +97,7 @@
 /* commands to include */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
@@ -116,6 +119,7 @@
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
 #define CONFIG_SYS_I2C_BUS_SELECT      1
+#define CONFIG_I2C_MULTI_BUS           1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
@@ -127,6 +131,7 @@
 /*
  * Board NAND Info.
  */
+#define CONFIG_SYS_NAND_QUIET_TEST     1
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
@@ -151,14 +156,17 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
        "console=ttyS2,115200n8\0" \
+       "mpurate=500\0" \
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
+       "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
        "mmcrootfstype=ext3 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
@@ -166,16 +174,17 @@
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
                "omapfb.debug=y " \
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
-       "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
@@ -185,7 +194,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init; then " \
+       "if mmc rescan ${mmcdev}; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -200,12 +209,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT               "Overo # "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              V_PROMPT
+#define CONFIG_SYS_PROMPT              "Overo # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -297,7 +304,6 @@
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
 
 #ifndef __ASSEMBLY__
-extern struct gpmc *gpmc_cfg;
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;
@@ -318,4 +324,11 @@ extern unsigned int boot_flash_type;
 
 #endif /* (CONFIG_CMD_NET) */
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif                         /* __CONFIG_H */