+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Common configuration settings for IGEP technology based boards
*
* (C) Copyright 2012
* ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __IGEP00X0_H
#define __IGEP00X0_H
-#define CONFIG_NR_DRAM_BANKS 2
-
#include <configs/ti_omap3_common.h>
/*
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_REVISION_TAG 1
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */
-#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */
/* TPS65950 */
#define PBIASLITEVMODE1 (1 << 8)
#define GPIO_IGEP00X0_BOARD_DETECTION 28
#define GPIO_IGEP00X0_REVISION_DETECTION 129
-/* USB */
-#define CONFIG_USB_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-#define CONFIG_TWL4030_USB 1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "IGEP"
-
-#ifndef CONFIG_SPL_BUILD
-
/* Environment */
#define ENV_DEVICE_SETTINGS \
"stdin=serial\0" \
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#define ENV_FINDFDT \
MEM_LAYOUT_SETTINGS \
BOOTENV
-#endif
-
-/*
- * SMSC911x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE 0x2C000000
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_SYS_MTDPARTS_RUNTIME
-
/* OneNAND config */
-#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
/* NAND config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS 4096
-#define CONFIG_SPL_UBI_VOL_IDS 8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
-#define CONFIG_SPL_UBI_PEB_OFFSET 4
-#define CONFIG_SPL_UBI_VID_OFFSET 512
-#define CONFIG_SPL_UBI_LEB_START 2048
-#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
-
-/* environment organization */
-#define CONFIG_ENV_UBI_PART "UBI"
-#define CONFIG_ENV_UBI_VOLUME "config"
-#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
-#define CONFIG_UBI_SILENCE_MSG 1
-#define CONFIG_UBIFS_SILENCE_MSG 1
-#define CONFIG_ENV_SIZE (32*1024)
#endif /* __IGEP00X0_H */