Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / omap3_igep00x0.h

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 521e167..93d3635 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -15,10 +15,6 @@
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE           0x40200000
-
-#define CONFIG_REVISION_TAG            1
 
 /* TPS65950 */
 #define PBIASLITEVMODE1                        (1 << 8)
@@ -32,8 +28,6 @@
 #define GPIO_IGEP00X0_BOARD_DETECTION          28
 #define GPIO_IGEP00X0_REVISION_DETECTION       129
 
-#ifndef CONFIG_SPL_BUILD
-
 /* Environment */
 #define ENV_DEVICE_SETTINGS \
        "stdin=serial\0" \
@@ -65,57 +59,25 @@
                "if test ${fdtfile} = ''; then " \
                        "echo WARNING: Could not determine device tree to use; fi; \0"
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        ENV_FINDFDT \
        ENV_DEVICE_SETTINGS \
        MEM_LAYOUT_SETTINGS \
        BOOTENV
 
-#endif
-
-#define CONFIG_SYS_MTDPARTS_RUNTIME
-
 /* OneNAND config */
-#define CONFIG_USE_ONENAND_BOARD_INIT
-#define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
-#define CONFIG_SYS_ONENAND_BLOCK_SIZE  (128*1024)
+#define CFG_SYS_ONENAND_BASE           ONENAND_MAP
+#define CFG_SYS_ONENAND_BLOCK_SIZE     (128*1024)
 
 /* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, \
+#define CFG_SYS_NAND_ECCPOS            { 2,  3,  4,  5,  6,  7,  8,  9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
                                         26, 27, 28, 29, 30, 31, 32, 33, \
                                         34, 35, 36, 37, 38, 39, 40, 41, \
                                         42, 43, 44, 45, 46, 47, 48, 49, \
                                         50, 51, 52, 53, 54, 55, 56, 57, }
-#define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI                 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS    256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE    (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS                4096
-#define CONFIG_SPL_UBI_VOL_IDS         8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID  3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID    4
-#define CONFIG_SPL_UBI_PEB_OFFSET      4
-#define CONFIG_SPL_UBI_VID_OFFSET      512
-#define CONFIG_SPL_UBI_LEB_START       2048
-#define CONFIG_SPL_UBI_INFO_ADDR       0x88080000
-
-/* environment organization */
-#define CONFIG_ENV_UBI_PART            "UBI"
-#define CONFIG_ENV_UBI_VOLUME          "config"
-#define CONFIG_ENV_UBI_VOLUME_REDUND   "config_r"
-#define CONFIG_ENV_SIZE                        (32*1024)
+#define CFG_SYS_NAND_ECCSIZE           512
+#define CFG_SYS_NAND_ECCBYTES  14
 
 #endif /* __IGEP00X0_H */