Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0bf2df2..86fc8ed 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -18,38 +18,21 @@
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* NAND */
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT      64
-#define CONFIG_SYS_NAND_PAGE_SIZE       2048
-#define CONFIG_SYS_NAND_OOBSIZE         64
-#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
+#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
-#define CONFIG_ENV_ADDR                 0x260000
-#define CONFIG_ENV_OVERWRITE
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 #endif /* CONFIG_SPL_OS_BOOT */
-#endif /* CONFIG_NAND */
-
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
+#endif /* CONFIG_MTD_RAW_NAND */
 
 /* Enable Multi Bus support for I2C */
 #define CONFIG_I2C_MULTI_BUS
@@ -58,9 +41,6 @@
 
 /* TWL4030 LED Support */
 
-#define CONFIG_USE_PREBOOT
-#define CONFIG_PREBOOT                  "usb start"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV
 
@@ -71,7 +51,7 @@
 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
        #devtypel #instance " "
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 
 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
        "bootcmd_" #devtypel #instance "=" \
@@ -89,13 +69,13 @@
        func(UBIFS, ubifs, 0) \
        func(NAND, nand, 0)
 
-#else /* !CONFIG_NAND */
+#else /* !CONFIG_MTD_RAW_NAND */
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(LEGACY_MMC, legacy_mmc, 0)
 
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 #include <config_distro_bootcmd.h>
 
@@ -216,7 +196,7 @@
                "${defargs} " \
                "${optargs} " \
                "root=${ramroot} ramdisk_size=${ramdisk_size} " \
-               "rootfstype=${ramrootfstype}\0" \
+               "rootfstype=${ramrootfstype}\0" \
        "ramboot=run mmcbootenv; " \
                "if run loadimage && run loaddtb && run loadramdisk; then " \
                        "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \