rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / omap1610h2.h

diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 94af0b2..aeb2fec 100644 (file)
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -27,12 +27,6 @@
 #define __CONFIG_H
 
 /*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL            /* undef for developing */
-
-/*
  * High Level Configuration Options
  * (easy to change)
  */
@@ -40,6 +34,7 @@
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP1610                1       /* which is in a 1610 */
 #define CONFIG_H2_OMAP1610     1       /* on an H2 Board */
+#define CONFIG_MACH_OMAP_H2            /* Select board mach-type */
 
 /* input clock of PLL */
 /* the OMAP1610 H2 has 12MHz input clock */
@@ -51,11 +46,12 @@
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
 #define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
 
 /*
@@ -85,20 +81,32 @@
 #define CONFIG_BAUDRATE        115200
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+
 #include <configs/omap1510.h>
 
 #define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS        "mem=32M console=ttyS0,115200n8 noinitrd \
-                               root=/dev/nfs ip=dhcp"
+#define CONFIG_BOOTARGS        "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp"
 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
 #define CFG_AUTOLOAD            "n"             /* No autoload */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
 #endif
@@ -173,14 +181,14 @@ extern unsigned long omap_flash_base;             /* set in flash__init */
 #define PHYS_FLASH_SIZE        0x02000000      /* 32MB */
 #define CFG_MAX_FLASH_SECT     (259)   /* max number of sectors on one chip */
 /* addr of environment */
-#define CFG_ENV_ADDR   (CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR        (CFG_FLASH_BASE + 0x020000)
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT   (20*CFG_HZ)     /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT   (20*CFG_HZ)     /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH    1
-#define CFG_ENV_SIZE   0x20000 /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE        0x20000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET      0x20000 /* environment starts here */
 
 #endif                                                 /* __CONFIG_H */