#include <configs/exynos4-common.h>
-#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310
-#define CONFIG_SYS_PL310_BASE 0x10502000
+#define CFG_SYS_PL310_BASE 0x10502000
#endif
-#define CONFIG_MACH_TYPE 4289
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CFG_SYS_BOOTMAPSZ 0x10000000
+#define CFG_SYS_SDRAM_BASE 0x40000000
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-/* Reserve the last 1 MiB for the secure firmware */
-#define CONFIG_SYS_MEM_TOP_HIDE (1UL << 20UL)
-#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE
#include <linux/sizes.h>
-/* select serial console configuration */
-
-/* Console configuration */
-
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_OVERWRITE
-
/* Partitions name */
#define PARTS_BOOT "boot"
#define PARTS_ROOT "platform"
-#define CONFIG_DFU_ALT \
+#define CFG_DFU_ALT \
"uImage fat 0 1;" \
"zImage fat 0 1;" \
"Image.itb fat 0 1;" \
""PARTS_BOOT" part 0 1;" \
""PARTS_ROOT" part 0 2\0" \
-#define CONFIG_SET_DFU_ALT_INFO
-#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
+#define CFG_SET_DFU_ALT_BUF_LEN (SZ_1K)
-#define CONFIG_DFU_ALT_BOOT_EMMC \
+#define CFG_DFU_ALT_BOOT_EMMC \
"u-boot raw 0x3e 0x800 mmcpart 1;" \
"bl1 raw 0x0 0x1e mmcpart 1;" \
"bl2 raw 0x1e 0x1d mmcpart 1;" \
"tzsw raw 0x83e 0x138 mmcpart 1\0"
-#define CONFIG_DFU_ALT_BOOT_SD \
+#define CFG_DFU_ALT_BOOT_SD \
"u-boot raw 0x3f 0x800;" \
"bl1 raw 0x1 0x1e;" \
"bl2 raw 0x1f 0x1d;" \
* 1. BOOT: 100MiB 2MiB
* 2. ROOT: -
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
"boot.scr\0" \
"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
"elif test -e mmc ${mmcbootdev} uImage; then; " \
"run boot_uimg;" \
"fi;\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=console=ttySAC1,115200n8\0" \
"mmcbootdev=0\0" \
"mmcbootpart=1\0" \
"mmcrootdev=0\0" \
"mmcrootpart=2\0" \
- "dfu_alt_system="CONFIG_DFU_ALT \
+ "dfu_alt_system="CFG_DFU_ALT \
"dfu_alt_info=Please reset the board\0" \
"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
"consoleoff=set console console=ram; save; reset\0" \
"kernel_addr_r=0x41000000\0" \
BOOTENV
-/* GPT */
-
-/* Security subsystem - enable hw_rand() */
-#define CONFIG_EXYNOS_ACE_SHA
-
-/* USB */
-#define CONFIG_USB_EHCI_EXYNOS
-
-/*
- * Supported Odroid boards: X3, U3
- * TODO: Add Odroid X support
- */
-#define CONFIG_MISC_COMMON
-
-#undef CONFIG_REVISION_TAG
-
#endif /* __CONFIG_H */