+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Samsung Electronics
* Sanghee Kim <sh0130.kim@samsung.com>
* Przemyslaw Marczak <p.marczak@samsung.com>
*
* Configuation settings for the Odroid-U3 (EXYNOS4412) board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ODROID_U3_H
#define CONFIG_MACH_TYPE 4289
-#define CONFIG_NR_DRAM_BANKS 8
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_TEXT_BASE 0x43e00000
#include <linux/sizes.h>
/* select serial console configuration */
-#define CONFIG_SERIAL1
/* Console configuration */
-#define CONFIG_BOOTCOMMAND "run autoboot"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */
#define CONFIG_ENV_OVERWRITE
/* Partitions name */
""PARTS_BOOT" part 0 1;" \
""PARTS_ROOT" part 0 2\0" \
-#define CONFIG_SET_DFU_ALT_INFO
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
#define CONFIG_DFU_ALT_BOOT_EMMC \
"bl2 raw 0x1f 0x1d;" \
"tzsw raw 0x83f 0x138\0"
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 2) \
+ func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+
/*
* Bootable media layout:
* dev: SD eMMC(part boot)
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
"boot.scr\0" \
- "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
+ "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
"${kernelname}\0" \
- "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
+ "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${ramdisk_addr_r} " \
"${initrdname}\0" \
- "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
+ "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdt_addr_r} " \
"${fdtfile}\0" \
"check_ramdisk=" \
"if run loadinitrd; then " \
- "setenv initrd_addr ${initrdaddr};" \
+ "setenv initrd_addr ${ramdisk_addr_r};" \
"else " \
"setenv initrd_addr -;" \
"fi;\0" \
"check_dtb=" \
"if run loaddtb; then " \
- "setenv fdt_addr ${fdtaddr};" \
+ "setenv fdt_addr ${fdt_addr_r};" \
"else " \
"setenv fdt_addr;" \
"fi;\0" \
"run loadbootscript;" \
"source ${scriptaddr}\0" \
"boot_fit=" \
- "setenv kerneladdr 0x42000000;" \
"setenv kernelname Image.itb;" \
"run loadkernel;" \
"run kernel_args;" \
- "bootm ${kerneladdr}#${boardname}\0" \
+ "bootm ${kernel_addr_r}#${board_name}\0" \
"boot_uimg=" \
- "setenv kerneladdr 0x40007FC0;" \
"setenv kernelname uImage;" \
"run check_dtb;" \
"run check_ramdisk;" \
"run loadkernel;" \
"run kernel_args;" \
- "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+ "bootm ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
"boot_zimg=" \
- "setenv kerneladdr 0x40007FC0;" \
"setenv kernelname zImage;" \
"run check_dtb;" \
"run check_ramdisk;" \
"run loadkernel;" \
"run kernel_args;" \
- "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
+ "bootz ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
"autoboot=" \
- "if test -e mmc 0 boot.scr; then; " \
+ "if test -e mmc ${mmcbootdev} boot.scr; then; " \
"run boot_script; " \
- "elif test -e mmc 0 Image.itb; then; " \
+ "elif test -e mmc ${mmcbootdev} Image.itb; then; " \
"run boot_fit;" \
- "elif test -e mmc 0 zImage; then; " \
+ "elif test -e mmc ${mmcbootdev} zImage; then; " \
"run boot_zimg;" \
- "elif test -e mmc 0 uImage; then; " \
+ "elif test -e mmc ${mmcbootdev} uImage; then; " \
"run boot_uimg;" \
"fi;\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"mmcbootpart=1\0" \
"mmcrootdev=0\0" \
"mmcrootpart=2\0" \
- "bootdelay=0\0" \
"dfu_alt_system="CONFIG_DFU_ALT \
"dfu_alt_info=Please reset the board\0" \
"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
"consoleoff=set console console=ram; save; reset\0" \
"initrdname=uInitrd\0" \
- "initrdaddr=42000000\0" \
+ "ramdisk_addr_r=0x42000000\0" \
"scriptaddr=0x42000000\0" \
- "fdtaddr=40800000\0"
+ "fdt_addr_r=0x40800000\0" \
+ "kernel_addr_r=0x41000000\0" \
+ BOOTENV
/* GPT */
-#define CONFIG_RANDOM_UUID
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_LIB_HW_RAND
/* USB */
#define CONFIG_USB_EHCI_EXYNOS
* TODO: Add Odroid X support
*/
#define CONFIG_MISC_COMMON
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_BOARD_TYPES
-#define CONFIG_MISC_INIT_R
#undef CONFIG_REVISION_TAG