Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / o2dnt.h

diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index bfae7b4..cca32e6 100644 (file)
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -32,6 +32,8 @@
 #define CONFIG_MPC5200
 #define CONFIG_O2DNT           1       /* ... on O2DNT board */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF000000      /* boot low for 16 MiB boards */
+
 #define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
@@ -102,10 +104,10 @@
 #define CONFIG_CMD_PCI
 
 
-#if (TEXT_BASE == 0xFF000000)          /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)               /* Boot low with 16 MB Flash */
 #   define CONFIG_SYS_LOWBOOT          1
 #else
-#   error "TEXT_BASE must be 0xFF000000"
+#   error "CONFIG_SYS_TEXT_BASE must be 0xFF000000"
 #endif
 
 /*
@@ -138,7 +140,6 @@
 
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -154,7 +155,6 @@
  */
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2   /* define for 66MHz speed */
 #endif
-#endif
 
 /*
  * I2C configuration
@@ -224,7 +224,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor   */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
@@ -233,10 +233,11 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC5xxx_FEC     1
+#define CONFIG_MPC5xxx_FEC_MII100
 /*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
  */
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
 #define CONFIG_PHY_ADDR                0x00
 
 /*
@@ -275,13 +276,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT           0
-#define CONFIG_SYS_HID0_FINAL          0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE