/*
* High Level Configuration Options
*/
-#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
-
-#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_UBI_SIZE (512 << 10)
-
/*
* Hardware drivers
*/
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+#define CFG_SYS_NS16550_CLK V_NS16550_CLK
/*
* select serial console configuration
*/
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CFG_SYS_NS16550_COM3 OMAP34XX_UART3
-#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE
-#define CONFIG_USB_TTY
-#define CONFIG_USBD_VENDORID 0x0421
-#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
-#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
-#define CONFIG_USBD_MANUFACTURER "Nokia"
-#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
+#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
#define GPIO_SLIDE 71
* Board ONENAND Info.
*/
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-
-/*
- * Framebuffer
- */
-/* Video console */
-#define CONFIG_VIDEO_LOGO
-#define VIDEO_FB_16BPP_PIXEL_SWAP
-#define VIDEO_FB_16BPP_WORD_SWAP
-
-/* functions for cfb_console */
-#define VIDEO_KBD_INIT_FCT rx51_kp_init()
-#define VIDEO_TSTC_FCT rx51_kp_tstc
-#define VIDEO_GETC_FCT rx51_kp_getc
-#ifndef __ASSEMBLY__
-struct stdio_dev;
-int rx51_kp_init(void);
-int rx51_kp_tstc(struct stdio_dev *sdev);
-int rx51_kp_getc(struct stdio_dev *sdev);
-#endif
+#define CFG_SYS_ONENAND_BASE ONENAND_MAP
/* Environment information */
#define CONFIG_EXTRA_ENV_SETTINGS \
"usbtty=cdc_acm\0" \
- "stdin=usbtty,serial,vga\0" \
- "stdout=usbtty,serial,vga\0" \
- "stderr=usbtty,serial,vga\0" \
+ "stdin=usbtty,serial,keyboard\0" \
+ "stdout=usbtty,serial,vidconsole\0" \
+ "stderr=usbtty,serial,vidconsole\0" \
"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
"switchmmc=mmc dev ${mmcnum}\0" \
"kernaddr=0x82008000\0" \
"initrdaddr=0x84008000\0" \
"scriptaddr=0x86008000\0" \
+ "fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
- "${loadaddr} ${mmcfile}\0" \
- "kernload=setenv loadaddr ${kernaddr};" \
+ "${fileloadaddr} ${mmcfile}\0" \
+ "kernload=setenv fileloadaddr ${kernaddr};" \
"setenv mmcfile ${mmckernfile};" \
"run fileload\0" \
- "initrdload=setenv loadaddr ${initrdaddr};" \
+ "initrdload=setenv fileloadaddr ${initrdaddr};" \
"setenv mmcfile ${mmcinitrdfile};" \
"run fileload\0" \
- "scriptload=setenv loadaddr ${scriptaddr};" \
+ "scriptload=setenv fileloadaddr ${scriptaddr};" \
"setenv mmcfile ${mmcscriptfile};" \
"run fileload\0" \
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
"echo run attachboot - Boot attached kernel image.;" \
"echo"
-#define CONFIG_BOOTCOMMAND \
- "run sdboot;" \
- "run emmcboot;" \
- "run attachboot;" \
- "echo"
-
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
* This rate is divided by a local divisor.
*/
-#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CFG_SYS_TIMERBASE (OMAP34XX_GPT2)
/*
* Physical Memory Map
* FLASH and environment organization
*/
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CFG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CFG_SYS_INIT_RAM_SIZE 0x800
/*
* Attached kernel image
*/
#define SDRAM_SIZE 0x10000000 /* 256 MB */
-#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+#define SDRAM_END (CFG_SYS_SDRAM_BASE + SDRAM_SIZE)
#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
#define KERNEL_OFFSET 0x40000 /* 256 kB */