/*
* High Level Configuration Options
*/
-#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
-
-#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
-
-#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
-#define CONFIG_INITRD_TAG /* enable passing initrd */
-#define CONFIG_REVISION_TAG /* enable passing revision tag*/
-#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_UBI_SIZE (512 << 10)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
- (128 << 10))
-
/*
* Hardware drivers
*/
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
*/
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
/* USB device configuration */
#define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
#define CONFIG_USBD_VENDORID 0x0421
-#define CONFIG_USBD_PRODUCTID 0x01c8
+#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
#define CONFIG_USBD_MANUFACTURER "Nokia"
-#define CONFIG_USBD_PRODUCT_NAME "N900"
-
-/* commands to include */
-
-#define CONFIG_SYS_I2C
-
-/*
- * TWL4030
- */
+#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
#define GPIO_SLIDE 71
* Board ONENAND Info.
*/
-#define PART1_NAME "bootloader"
-#define PART1_SIZE 128
-#define PART1_MULL 1024
-#define PART1_SUFF "k"
-#define PART1_OFFS 0x00000000
-#define PART1_MASK 0x00000003
-
-#define PART2_NAME "config"
-#define PART2_SIZE 384
-#define PART2_MULL 1024
-#define PART2_SUFF "k"
-#define PART2_OFFS 0x00020000
-#define PART2_MASK 0x00000000
-
-#define PART3_NAME "log"
-#define PART3_SIZE 256
-#define PART3_MULL 1024
-#define PART3_SUFF "k"
-#define PART3_OFFS 0x00080000
-#define PART3_MASK 0x00000000
-
-#define PART4_NAME "kernel"
-#define PART4_SIZE 2
-#define PART4_MULL 1024*1024
-#define PART4_SUFF "m"
-#define PART4_OFFS 0x000c0000
-#define PART4_MASK 0x00000000
-
-#define PART5_NAME "initfs"
-#define PART5_SIZE 2
-#define PART5_MULL 1024*1024
-#define PART5_SUFF "m"
-#define PART5_OFFS 0x002c0000
-#define PART5_MASK 0x00000000
-
-#define PART6_NAME "rootfs"
-#define PART6_SIZE 257280
-#define PART6_MULL 1024
-#define PART6_SUFF "k"
-#define PART6_OFFS 0x004c0000
-#define PART6_MASK 0x00000000
-
-#ifdef ONENAND_SUPPORT
-
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-#endif
-
-/* Watchdog support */
-#define CONFIG_HW_WATCHDOG
-
-/*
- * Framebuffer
- */
-/* Video console */
-#define CONFIG_VIDEO_LOGO
-#define VIDEO_FB_16BPP_PIXEL_SWAP
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_SPLASH_SCREEN
-
-/* functions for cfb_console */
-#define VIDEO_KBD_INIT_FCT rx51_kp_init()
-#define VIDEO_TSTC_FCT rx51_kp_tstc
-#define VIDEO_GETC_FCT rx51_kp_getc
-#ifndef __ASSEMBLY__
-struct stdio_dev;
-int rx51_kp_init(void);
-int rx51_kp_tstc(struct stdio_dev *sdev);
-int rx51_kp_getc(struct stdio_dev *sdev);
-#endif
-
/* Environment information */
-#ifdef CONFIG_MTDPARTS_DEFAULT
-#define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
-#else
-#define MTDPARTS
-#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- MTDPARTS \
"usbtty=cdc_acm\0" \
- "stdin=vga\0" \
- "stdout=vga\0" \
- "stderr=vga\0" \
- "setcon=setenv stdin ${con};" \
- "setenv stdout ${con};" \
- "setenv stderr ${con}\0" \
- "sercon=setenv con serial; run setcon\0" \
- "usbcon=setenv con usbtty; run setcon\0" \
- "vgacon=setenv con vga; run setcon\0" \
+ "stdin=usbtty,serial,keyboard\0" \
+ "stdout=usbtty,serial,vidconsole\0" \
+ "stderr=usbtty,serial,vidconsole\0" \
"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
"switchmmc=mmc dev ${mmcnum}\0" \
"kernaddr=0x82008000\0" \
"initrdaddr=0x84008000\0" \
"scriptaddr=0x86008000\0" \
+ "fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
- "${loadaddr} ${mmcfile}\0" \
- "kernload=setenv loadaddr ${kernaddr};" \
+ "${fileloadaddr} ${mmcfile}\0" \
+ "kernload=setenv fileloadaddr ${kernaddr};" \
"setenv mmcfile ${mmckernfile};" \
"run fileload\0" \
- "initrdload=setenv loadaddr ${initrdaddr};" \
+ "initrdload=setenv fileloadaddr ${initrdaddr};" \
"setenv mmcfile ${mmcinitrdfile};" \
"run fileload\0" \
- "scriptload=setenv loadaddr ${scriptaddr};" \
+ "scriptload=setenv fileloadaddr ${scriptaddr};" \
"setenv mmcfile ${mmcscriptfile};" \
"run fileload\0" \
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
"kernboot=echo Booting ${mmckernfile} from mmc " \
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} || " \
+ "bootz ${kernaddr}\0" \
"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
- "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr} || " \
+ "bootz ${kernaddr} ${initrdaddr}\0" \
"attachboot=echo Booting attached kernel image ...;" \
"setenv setup_omap_atag 1;" \
- "bootm ${attkernaddr};" \
+ "bootm ${attkernaddr} || bootz ${attkernaddr};" \
"setenv setup_omap_atag\0" \
- "trymmcscriptboot=if run switchmmc; then " \
- "if run scriptload; then " \
- "run scriptboot;" \
- "fi;" \
- "fi\0" \
- "trymmckernboot=if run switchmmc; then " \
- "if run kernload; then " \
- "run kernboot;" \
- "fi;" \
- "fi\0" \
- "trymmckerninitrdboot=if run switchmmc; then " \
- "if run initrdload; then " \
- "if run kernload; then " \
- "run kerninitrdboot;" \
- "fi;" \
- "fi; " \
- "fi\0" \
+ "trymmcscriptboot=run switchmmc && run scriptload && run scriptboot\0" \
+ "trymmckernboot=run switchmmc && run kernload && run kernboot\0" \
+ "trymmckerninitrdboot=run switchmmc && run initrdload && " \
+ "run kernload && run kerninitrdboot\0" \
"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
- "setenv mmckernfile uImage; run trymmckernboot\0" \
+ "setenv mmckernfile uImage; run trymmckernboot;" \
+ "setenv mmckernfile zImage; run trymmckernboot\0" \
"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
"setenv mmcpart 2; run trymmcpartboot;" \
"setenv mmcpart 3; run trymmcpartboot;" \
"trymmcboot=if run switchmmc; then " \
"setenv mmctype fat;" \
"run trymmcallpartboot;" \
- "setenv mmctype ext2;" \
- "run trymmcallpartboot;" \
"setenv mmctype ext4;" \
"run trymmcallpartboot;" \
"fi\0" \
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
- "preboot=setenv mmcnum 1; setenv mmcpart 1;" \
- "setenv mmcscriptfile bootmenu.scr;" \
- "if run switchmmc; then " \
- "setenv mmcdone true;" \
- "setenv mmctype fat;" \
- "if run scriptload; then true; else " \
- "setenv mmctype ext2;" \
- "if run scriptload; then true; else " \
- "setenv mmctype ext4;" \
- "if run scriptload; then true; else " \
- "setenv mmcdone false;" \
- "fi;" \
- "fi;" \
- "fi;" \
- "if ${mmcdone}; then " \
- "run scriptboot;" \
- "fi;" \
- "fi;" \
+ "trymmcbootmenu=setenv mmctype fat && run trymmcscriptboot || " \
+ "setenv mmctype ext4 && run trymmcscriptboot\0" \
+ "preboot=setenv mmcpart 1; setenv mmcscriptfile bootmenu.scr;" \
+ "setenv mmcnum 0 && run trymmcbootmenu || " \
+ "setenv mmcnum 1 && run trymmcbootmenu;" \
"if run slide; then true; else " \
"setenv bootmenu_delay 0;" \
"setenv bootdelay 0;" \
#define CONFIG_POSTBOOTMENU \
"echo;" \
"echo Extra commands:;" \
- "echo run sercon - Use serial port for control.;" \
- "echo run usbcon - Use usbtty for control.;" \
- "echo run vgacon - Use framebuffer/keyboard.;" \
"echo run sdboot - Boot from SD card slot.;" \
"echo run emmcboot - Boot internal eMMC memory.;" \
"echo run attachboot - Boot attached kernel image.;" \
"echo"
-#define CONFIG_BOOTCOMMAND \
- "run sdboot;" \
- "run emmcboot;" \
- "run attachboot;" \
- "echo"
-
-/*
- * Miscellaneous configurable options
- */
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
* This rate is divided by a local divisor.
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
* Physical Memory Map
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Attached kernel image