/*
* High Level Configuration Options
*/
-
-#define CONFIG_OMAP /* in a TI OMAP core */
-#define CONFIG_OMAP3430 /* which is in a 3430 */
-#define CONFIG_OMAP3_RX51 /* working with RX51 */
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
*/
#define CONFIG_SYS_TEXT_BASE 0x80008000
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* USB */
-#define CONFIG_USB_MUSB_UDC
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_USB_OMAP3
-#define CONFIG_TWL4030_USB
/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_MANUFACTURER "Nokia"
#define CONFIG_USBD_PRODUCT_NAME "N900"
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_NO_FLASH
-
/* commands to include */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
-#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
-
-#ifdef ONENAND_SUPPORT
-
-#define CONFIG_CMD_ONENAND /* ONENAND support */
-#define CONFIG_CMD_MTDPARTS /* mtd parts support */
-
-#ifdef UBIFS_SUPPORT
-#define CONFIG_CMD_UBI /* UBI Support */
-#define CONFIG_CMD_UBIFS /* UBIFS Support */
-#endif
-
-#endif
-
-#define CONFIG_OMAP3_SPI
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
*/
-#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED
#define CONFIG_TWL4030_KEYPAD
-#define CONFIG_OMAP_GPIO
#define GPIO_SLIDE 71
/*
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#ifdef UBIFS_SUPPORT
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#endif
-
-#define MTDIDS_DEFAULT "onenand0=onenand"
-#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
- __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
- __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
- __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
- __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
- __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
- "-(" PART6_NAME ")"
-
#endif
/* Watchdog support */
* Framebuffer
*/
/* Video console */
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
/* functions for cfb_console */
int rx51_kp_getc(struct stdio_dev *sdev);
#endif
-#ifndef MTDPARTS_DEFAULT
-#define MTDPARTS_DEFAULT
-#endif
-
/* Environment information */
+#ifdef CONFIG_MTDPARTS_DEFAULT
+#define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+#else
+#define MTDPARTS
+#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ MTDPARTS \
"usbtty=cdc_acm\0" \
"stdin=vga\0" \
"stdout=vga\0" \
"run attachboot;" \
"echo"
-#define CONFIG_MENU
#define CONFIG_MENU_SHOW
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-
-/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
* FLASH and environment organization
*/
-#define CONFIG_ENV_IS_NOWHERE
-
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800