sunxi: Add axp209 pmic support

[platform/kernel/u-boot.git] / include / configs / nitrogen6x.h

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index d515e49..b2b17ce 100644 (file)
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -10,6 +10,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "mx6_common.h"
 #define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -23,6 +24,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
@@ -30,6 +32,12 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MXC_GPIO
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_CDC
+#define CONFIG_NETCONSOLE
 
 #define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
@@ -56,16 +64,6 @@
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
 
-/* OCOTP Configs */
-#define CONFIG_CMD_IMXOTP
-#ifdef CONFIG_CMD_IMXOTP
-#define CONFIG_IMX_OTP
-#define IMX_OTP_BASE                   OCOTP_BASE_ADDR
-#define IMX_OTP_ADDR_MAX               0x7F
-#define IMX_OTP_DATA_ERROR_VAL         0xBADABADA
-#define IMX_OTPWRITE_ENABLED
-#endif
-
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -118,8 +116,10 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MXC_USB_PORT    1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
@@ -142,6 +142,7 @@
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -182,7 +183,7 @@
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdt_file=imx6q-sabrelite.dtb\0" \
-       "fdt_addr=0x11000000\0" \
+       "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
@@ -299,7 +300,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR          CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                 1000
 
 #define CONFIG_CMDLINE_EDITING
 
@@ -355,4 +355,14 @@
 #define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_CMD_FS_GENERIC
 
+/*
+ * PCI express
+ */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#endif
+
 #endif        /* __CONFIG_H */