global: Migrate CONFIG_STACKBASE to CFG

[platform/kernel/u-boot.git] / include / configs / nas220.h

diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index 52db421..358c3bb 100644 (file)
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
  *
@@ -5,25 +6,11 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_NAS220_H
 #define _CONFIG_NAS220_H
 
-/*
- * Machine type ID
- */
-#define CONFIG_MACH_TYPE               MACH_TYPE_RD88F6192_NAS
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131                /* #define CPU Core subversion */
-#define CONFIG_KW88F6192               /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
 /* power-on led, regulator, sata0, sata1 */
 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
 #define NAS220_GE_OE_VAL_HIGH (0)
@@ -38,91 +25,18 @@
 #define MV88E1116_RGMII_TXTM_CTRL      (1 << 4)
 #define MV88E1116_RGMII_RXTM_CTRL      (1 << 5)
 
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_NAND
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
  *  Environment variables configurations
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#endif
-
-#define CONFIG_ENV_SIZE        0x10000
-#define CONFIG_ENV_OFFSET 0xa0000
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND ""
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "bootargs=console=ttyS0,115200\0" \
-       "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
-       "0x010000@0xa0000(env),"\
-       "0x500000@0xc0000(uimage),"\
-       "0x1a40000@0x5c0000(rootfs)\0" \
-       "mtdids=nand0=orion_nand\0"\
-       "bootdelay=-1\0"\
-       "autostart=no\0"\
-       "autoload=no\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS {1, 0}      /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR 8
-#endif /* CONFIG_CMD_NET */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_KIRKWOOD       /* on Kirkwood platform */
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
- * File system
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_LZO
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-
-/*
- * SATA
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#endif
-
-/*
- * EFI partition
- */
-
-/*
- *  Date Time
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
-#define CONFIG_KIRKWOOD_GPIO
+       "autostart=no\0"
 
 #endif /* _CONFIG_NAS220_H */
-