global: Migrate CONFIG_MXC_UART_BASE to CFG

[platform/kernel/u-boot.git] / include / configs / nas220.h

diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index 5251db9..358c3bb 100644 (file)
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -11,18 +11,6 @@
 #ifndef _CONFIG_NAS220_H
 #define _CONFIG_NAS220_H
 
-/*
- * Machine type ID
- */
-#define CONFIG_MACH_TYPE               MACH_TYPE_RD88F6192_NAS
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131                /* #define CPU Core subversion */
-#define CONFIG_KW88F6192               /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
 /* power-on led, regulator, sata0, sata1 */
 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
 #define NAS220_GE_OE_VAL_HIGH (0)
@@ -37,14 +25,6 @@
 #define MV88E1116_RGMII_TXTM_CTRL      (1 << 4)
 #define MV88E1116_RGMII_RXTM_CTRL      (1 << 5)
 
-/*
- * Commands configuration
- */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
@@ -54,53 +34,9 @@
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND ""
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "bootargs=console=ttyS0,115200\0" \
-       "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
-       "0x010000@0xa0000(env),"\
-       "0x500000@0xc0000(uimage),"\
-       "0x1a40000@0x5c0000(rootfs)\0" \
-       "mtdids=nand0=orion_nand\0"\
-       "autostart=no\0"\
-       "autoload=no\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS {1, 0}      /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR 8
-#endif /* CONFIG_CMD_NET */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_KIRKWOOD       /* on Kirkwood platform */
-#define CONFIG_EHCI_IS_TDI
-#endif /* CONFIG_CMD_USB */
-
-/*
- * File system
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_LZO
-
-/*
- * SATA
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#endif
-
-/*
- * EFI partition
- */
-
-#define CONFIG_KIRKWOOD_GPIO
+       "autostart=no\0"
 
 #endif /* _CONFIG_NAS220_H */
-